It is currently Fri Apr 26, 2024 9:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 67 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: 501 work day at Mudds July 23rd
PostPosted: Sat Jul 16, 2011 12:12 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 06, 2009 7:35 pm
Posts: 4576
501 wrote:
tommudd wrote:
OH and daryl,
remember the clay bar and how it works,
Hope to see it shining and not covered in coffee like the last time.
Was a disgrace to my driveway :JEEPIN: :-)r


I thought maybe you and Hart could show me how the clay bar works again, maybe this time on the whole Jeep!

Sure, I'll show ya how it works on mine (even though I did a couple weekends ago) then you can do YOUR OWN :goink:


Top
 Profile  
 
 Post subject: Re: 501 work day at Mudds July 23rd
PostPosted: Sat Jul 16, 2011 7:01 pm 
Offline
LOST Member

Joined: Thu Nov 13, 2008 11:41 am
Posts: 296
FOOD
1) mudd....burgers, cola, ice for cooler many other things ( maybe)
2) 501 --- Grillers (hotdogs), Buns, couple bags of chips
3) Megalos ---- Drinks (Beer and sodas ok?)
4)Buggin-found out this am I have to work the next 2 Saturdays , can't go unless something changes or if I happen to get out early enough and am still awake to come on over later in the day
5)evil ,I will think of something ? and tools jack stands what time ?
6)
7)

_________________
Brian thanks and thanks to Tom I see you changed it...


Top
 Profile  
 
 Post subject: Re: 501 work day at Mudds July 23rd
PostPosted: Sun Jul 17, 2011 1:25 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 06, 2009 7:35 pm
Posts: 4576
evil libby wrote:
FOOD
1) mudd....burgers, cola, ice for cooler many other things ( maybe)
2) 501 --- Grillers (hotdogs), Buns, couple bags of chips
3) Megalos ---- Drinks (Beer and sodas ok?)
4)Buggin-found out this am I have to work the next 2 Saturdays , can't go unless something changes or if I happen to get out early enough and am still awake to come on over later in the day
5)evil ,I will think of something ?Release papers for the day trip, keys for handcuffs, mouth gaurd and helmet. and tools jack stands what time ? What ever time the state vehicle drops you off and hands you over to us with the propper release paperwork. :jester:
6)
7)


Top
 Profile  
 
 Post subject: Re: 501 work day at Mudds July 23rd
PostPosted: Sun Jul 17, 2011 8:09 pm 
Offline
LOST Member

Joined: Thu Nov 13, 2008 11:41 am
Posts: 296
thanks hart sounds about right but is there a real start time or is ever one just shgowing up waiting for the rev to give the time that the shop will open I need to talk to him about the rear bumper cover he has any way that is a black smooth paint job . Will bring a case of beer for a pice offering :ROTFL: :ROTFL:

_________________
Brian thanks and thanks to Tom I see you changed it...


Top
 Profile  
 
 Post subject: Re: 501 work day at Mudds July 23rd
PostPosted: Sun Jul 17, 2011 8:27 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Lets say 11:00 AM maybe ?
Have some food about noon

rear bumper covers?
I have a Sport and a Renegade
both have been cut off
case of Beer won't buy either since that would take me two years to drink :ROTFL:
or wait peace offering ????

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Tue Jul 19, 2011 9:23 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 06, 2009 7:35 pm
Posts: 4576
Any time my brotha :jester:


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Tue Jul 19, 2011 9:23 pm 
Offline
LOST Member

Joined: Thu Nov 13, 2008 11:41 am
Posts: 296
name your pric rev I may bring stump with me if comes down am makeing place to be there just need adress and we should be good

_________________
Brian thanks and thanks to Tom I see you changed it...


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Thu Jul 21, 2011 9:52 pm 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
It's official. I will be there. Dunno what I'm gonna bring though.

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Fri Jul 22, 2011 6:49 pm 
Offline
LOST Member

Joined: Tue Jun 21, 2011 7:13 pm
Posts: 176
Location: Westerville, Ohio
I'll be there

Sent from my Droid using Tapatalk


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 1:02 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 06, 2009 7:35 pm
Posts: 4576
Lookin forward to this one for sure, Tom is going to have a live band and an open bar :jester:


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 3:36 am 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
OK, so no KJ. I don't feel like going to go get it.

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 9:00 pm 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
Image
Image
Image
Image

And what happened to the KK today? :)

Image
Image

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 10:07 pm 
Offline
LOST Member

Joined: Tue Jun 21, 2011 7:13 pm
Posts: 176
Location: Westerville, Ohio
The jeep over heated in kenton, then took all day to get back to marysville. Wish I could have made it

Sent from my Droid using Tapatalk


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 10:20 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Wondered what happened to you today Doolop!
Was looking forward to meeting some new people!
Hope you get the KJ back up and running

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 10:32 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Good pictures Marlon
Have to download mine after while here

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 10:55 pm 
Offline
LOST Member

Joined: Tue Jun 21, 2011 7:13 pm
Posts: 176
Location: Westerville, Ohio
Thanks Tom I JB welded the hole/s I found. Looking like I am putting a new radiator in this week. Fml

Sent from my Droid using Tapatalk


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 11:29 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Image
Image
Image
Image
Image
Image
Image
Image

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sat Jul 23, 2011 11:47 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Nov 04, 2007 3:02 am
Posts: 2053
Location: Michigan City, IN
Had a great time today at Mudd's Garage!

Image
The driveway

Image
Getting to the point where I'll have to remove the roof basket before going back into the garage!

Image
Our famous host, Tom Mudd!!

Image
The one and only, Buggin!! (Hart)

Image
Megalos (Ed)

Image
Marlon_JBT (Marlon)

Image
teckman02 (Nick)

Image
Enjoying some 'Mudd Burgers' & BS-ing

Thanks guys for helping me out once again, it was great getting to see you all and sitting around BS-ing, hope to be able to do it again soon!

_________________
Blood Clot Red 03 Punisher Edition
245/75-16 Duratracs, Soft 8's, Ironman/clevis Lift, Monroe Sensa-trac rear shocks, JBA 3.5, GTP Hood Louvers, Roof Basket & Light bar, Mudd's Garage Rear Bumper
custom made items: cross rails, grill inserts, cargo shelf, lightbar, pin stripping & rock rails.
L.O.S.T. #DW090501


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sun Jul 24, 2011 12:17 am 
Offline
LOST Addict

Joined: Sat Sep 17, 2005 9:56 am
Posts: 1773
Location: Detroit or Ypsilanti, MI
Oh, by the way, Tom... you can cut off my muffler, but the resonator has to stay. :lol:

_________________
Me - '17 KL Trailhawk 4x4, Rhino, P245/65R17 Destination A/Ts, Stock Skids, waiting for mods...
Sis - '18 Cherokee Trailhawk 4x4 - Black - Dents - Scratches - STOCK


Top
 Profile  
 
 Post subject: Re: Work day/ M&G at Mudds July 23rd
PostPosted: Sun Jul 24, 2011 1:40 am 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 06, 2009 7:35 pm
Posts: 4576
Yep it sure was good to see everyone again! :JEEPIN:
Sorry I had to skip out so soon but the family guy had to go play his part today :roll: Ya know drive the family to places ya don't want to go and then sleep :ROTFL: Hey Marlon, it's nice to see the Rev had a sermon after I left and made ya holy :shock: :jester:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 67 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com