tommudd wrote:
First I don't have a dog in this fight
But comparing Atthehelms rack -vs- Rock Lizards show a lot of differences
I know Atthehelms is suppose to be the go to guy now for KK parts on here it seems But
comparing the two racks I see several points that moisture can get in when bolted together, welded maybe less depending on how good of a person you get to do the welding but you still have 20 points to weld compared to "2" for the RL . Sitting that rack up to get all 20 the same, with height etc will be a lot more problem, plus we won't get into strength. Not trying to knock your rack at all just pointing things out just like I did when I messaged you regarding moisture entering
Its not a fight, again I want to keep the record straight. Mudd you know that is important.
Its 10 lap welds plus plugging the welded nuts so if you're counting it that way then there are 6 on RL's. My racks are also stronger than they need to be, 230 lbs was hauled on mine without issue which is way more weight than should be put up there in the first place imo because of the higher COG for safety sake. I also tested that bolt together joint using sealant inside the joints and had no issues. Those racks ship with the sealant included. It was only for about a month but no signs of leakage. Now don't get me wrong, I agree a fully welded rack is a much better way to go but there is no way someone is going to pay $400-$500 for shipping (that is what I was quoted).
The bottom line really is if there is something you don't like, keep it to yourself. I think I remember reading that on the forum rules somewhere. Its easy to forget there is a lot of thought, hard work, and money put into the stuff that one man shows produce. There are things that RL does and did that I don't agree with, but I keep it to myself because I don't want to tarnish his reputation, I respect his business, and I have tact.