LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

09/07/13 Ted's RL rack/tank skid, Johns lift, Harts head,...
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=113&t=76459		 Page 2 of 5
Author:  John3:17 [ Tue Aug 27, 2013 12:57 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
Picking up top mounts and isolators from NAPA in morning, waiting on a call back from JBA to find out if they can assemble the springs and shocks when I stop in there at end of week.
Looks like it may all come together - what a scramble!
Author:  John3:17 [ Wed Aug 28, 2013 10:12 am ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
John3:17 wrote:
Picking up top mounts and isolators from NAPA in morning, waiting on a call back from JBA to find out if they can assemble the springs and shocks when I stop in there at end of week.
Looks like it may all come together - what a scramble!


I picked up the strut mounting kit from Napa this morning and........ only one isolator per box. Local NAPA agrees there's supposed to be two in box according to their computer . Waiting on call back from rep. Pic and instructions on box shows no upper isolator i.e. the plate bolted down tight to the spring ????? I'm confused.
Author:  03CDKJ [ Wed Aug 28, 2013 10:29 am ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
Anyone near Columbus going?
Author:  tommudd [ Wed Aug 28, 2013 11:59 am ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
John3:17 wrote:
John3:17 wrote:
Picking up top mounts and isolators from NAPA in morning, waiting on a call back from JBA to find out if they can assemble the springs and shocks when I stop in there at end of week.
Looks like it may all come together - what a scramble!


I picked up the strut mounting kit from Napa this morning and........ only one isolator per box. Local NAPA agrees there's supposed to be two in box according to their computer . Waiting on call back from rep. Pic and instructions on box shows no upper isolator i.e. the plate bolted down tight to the spring ????? I'm confused.

Yep, reason I didn't get them from NAPA when I was putting together the Ironman setup. Of course had to order them by themselves anyways but :roll:
Oh and yes takes uppers and lowers
Author:  MoD [ Tue Sep 03, 2013 11:58 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
Guys I am going to have to bow out of this one. My boss told me I had to work even though I told him it was a "religious event" and my "Reverend" requested I be there. :(
Author:  tommudd [ Wed Sep 04, 2013 10:11 am ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
MoD wrote:
Guys I am going to have to bow out of this one. My boss told me I had to work even though I told him it was a "religious event" and my "Reverend" requested I be there. :(

Want me to write a letter to him.
I can also send a copy of my Preaching License :wink:
Author:  tommudd [ Wed Sep 04, 2013 10:13 am ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
John
Come early ! Like Friday if possible :wink:
have you scheduled in for an alignment at 8 AM Saturday morning
at
Holland Tireman
7171 Orchard Centre Dr.
Holland, OH 43528
Author:  John3:17 [ Wed Sep 04, 2013 12:19 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
tommudd wrote:
John
Come early ! Like Friday if possible :wink:
have you scheduled in for an alignment at 8 AM Saturday morning
at
Holland Tireman
7171 Orchard Centre Dr.
Holland, OH 43528


Yeah I better cause this is lookin like an all nighter
Author:  tommudd [ Wed Sep 04, 2013 12:29 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
John3:17 wrote:
tommudd wrote:
John
Come early ! Like Friday if possible :wink:
have you scheduled in for an alignment at 8 AM Saturday morning
at
Holland Tireman
7171 Orchard Centre Dr.
Holland, OH 43528


Yeah I better cause this is lookin like an all nighter

All nighter just to install a lift that is already together ?
If it is it will be a first If its not done in 3 hours it goes back out the door for scrap
Author:  John3:17 [ Wed Sep 04, 2013 12:42 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
tommudd wrote:
John3:17 wrote:
tommudd wrote:
John
Come early ! Like Friday if possible :wink:
have you scheduled in for an alignment at 8 AM Saturday morning
at
Holland Tireman
7171 Orchard Centre Dr.
Holland, OH 43528


Yeah I better cause this is lookin like an all nighter

All nighter just to install a lift that is already together ?
If it is it will be a first If its not done in 3 hours it goes back out the door for scrap


:ROTFL: 3 hrs really? Sounds good to me! :pepper:
Author:  tommudd [ Wed Sep 04, 2013 1:12 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
John3:17 wrote:
tommudd wrote:
John3:17 wrote:

Yeah I better cause this is lookin like an all nighter

All nighter just to install a lift that is already together ?
If it is it will be a first If its not done in 3 hours it goes back out the door for scrap


:ROTFL: 3 hrs really? Sounds good to me! :pepper:


If Chris or Hart was helping be less than 3 for sure
Chris and I have had the front all torn out of a KJ before and at the shop getting springs compressed in 45 minutes, less than 30 for the rear, 45 minutes to reinstall the front
thats with hand tools no air
Now working with MoD .............well it took a little longer :goink: :ROTFL:
Author:  MoD [ Wed Sep 04, 2013 2:44 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
well us indiana boys might be a bit slow but we learn quick ;) I donno though maybe it was the shine...

and here i was going to bring some of the cherry shine a guy gave me for helping him with his jeep. :5SHOTS: now its all mine!! :twisted: :twisted: or it may wait for a different m&g
Author:  lfhoward [ Wed Sep 04, 2013 9:20 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
If I lived in the Midwest, I'd definitely be there. I've always wanted to come to one of your M&G's but 600 miles is a bit too far for a weekend trip when I have to work on Friday and Monday! :)
Author:  tommudd [ Wed Sep 04, 2013 9:53 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
lfhoward wrote:
If I lived in the Midwest, I'd definitely be there. I've always wanted to come to one of your M&G's but 600 miles is a bit too far for a weekend trip when I have to work on Friday and Monday! :)

Someday either over here or over your way we'll meet up!
Author:  Megalos [ Thu Sep 05, 2013 1:30 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
I was really hoping to make it up this time...obligations keep getting in the way.
Author:  tommudd [ Thu Sep 05, 2013 1:45 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
Well looks like we are lifting Johns on Friday ( tomorrow )
His gets aligned on Saturday morning
Ted will be over Saturday at _____________ to work on his new Rock Lizard rack :pepper:
and see what else we can get into

Going after gas for the welder here in a little bit,
have to rewire for the welder , new breaker , dedicated outlet etc
dang I have a lot to do yet :banghead:
plus I'm hungry
Author:  John3:17 [ Thu Sep 05, 2013 3:40 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
Waitin on Fedex to deliver the uca's. :banghead: :banghead: Tracking says it went out on truck this morning. :juggle: I did see one of their trucks fly past about 2 hr.'s ago. :ALONE:
Author:  tommudd [ Thu Sep 05, 2013 4:35 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
John3:17 wrote:
Waitin on Fedex to deliver the uca's. :banghead: :banghead: Tracking says it went out on truck this morning. :juggle: I did see one of their trucks fly past about 2 hr.'s ago. :ALONE:


OH wait we're doing UCAs as well :shock:
forgot I guess :banghead:
should of picked them up while you were there :wink:
What time do you think you'll make it over ?
No rush since I have a ton to do in the AM anyways
Author:  MoD [ Thu Sep 05, 2013 4:45 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
tommudd wrote:
John3:17 wrote:
Waitin on Fedex to deliver the uca's. :banghead: :banghead: Tracking says it went out on truck this morning. :juggle: I did see one of their trucks fly past about 2 hr.'s ago. :ALONE:


OH wait we're doing UCAs as well :shock:
forgot I guess :banghead:
should of picked them up while you were there :wink:
What time do you think you'll make it over ?
No rush since I have a ton to do in the AM anyways


I thought he was telling me he was going to show up around 5am. You know those old guys and showing up early! :goink: at least some of us have the decency to wait for breakfast :P
Author:  Ted15 [ Thu Sep 05, 2013 5:28 pm ]
Post subject:  Re: 09/07/13 Ted here and ??? Maybe the last one here so....
tommudd wrote:
Well looks like we are lifting Johns on Friday ( tomorrow )
His gets aligned on Saturday morning
Ted will be over Saturday at _____________ to work on his new Rock Lizard rack :pepper:
and see what else we can get into

Going after gas for the welder here in a little bit,
have to rewire for the welder , new breaker , dedicated outlet etc
dang I have a lot to do yet :banghead:
plus I'm hungry


I'll probably show up sometime tomorrow to prep the rack and hang out. I've got lots to do, took Friday off, we'll see what I can get done before I leave.
Page 2 of 5 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/