LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
3/22/14 Working on a good friends KJ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=113&t=78504 |
Page 1 of 2 |
Author: | tommudd [ Fri Mar 07, 2014 4:01 pm ] |
Post subject: | 3/22/14 Working on a good friends KJ |
They are coming and we're doing some work to their KJ on the 22nd, possibly into the 23rd if needed. Depends on when they get here on the 22nd. if they are like TwoBobs and keep driving back and forth till 11 AM maybe a later start so we'll see Can't say more than that right now but we're doing some swapping of parts for sure ! No lifts though, we're getting serious now |
Author: | lfhoward [ Fri Mar 07, 2014 8:41 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
Would this possibly be a certain member from south central PA who has acquired a set of 4.10 diffs? I would love to come and hang out and help out, if I was able. Unfortunately got to work here in eastern PA! Hope the operation goes well! My bet is you are doing axle transplant surgery. |
Author: | tommudd [ Fri Mar 07, 2014 9:05 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
I know not of who you speak of All I got was a coded message that said " Help, more parts than I know what to do with stop. Need help and use of you garage on March 22-23 stop will bring food, lots of hundred dollars bills and root beer stop hope you will be home to help stop if not leave door unlocked stop " so not really sure whats going on |
Author: | KJWildman [ Fri Mar 07, 2014 9:27 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
So what are you doing March 15/16? I know a guy that needs to work on the front suspension of his XJ but has been working 7 days a week. Looks like he'll have that weekend off if you're in town and not too busy. Sent from my SCH-M828C using Tapatalk 2 |
Author: | tommudd [ Sat Mar 08, 2014 1:08 am ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
4 posts and its already derailed ........................... But not sure if I'll be here or not A call was sent out for a Plumber/ Electrician and Appliance Repair type person ( me ) I got all of the parts ordered today, should all be in by Wednesday/ Thursday (12th/13th) so.... its going to depend on how long everything takes Wonder who's going to do stuff for me when I'm 86? Hopefully Mac can learn fast when he gets here But to the XJ, how long has it needed work done now?? |
Author: | TwoBobsKJ [ Sun Mar 16, 2014 4:40 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
tommudd wrote: They are coming and we're doing some work to their KJ on the 22nd, possibly into the 23rd if needed. Depends on when they get here on the 22nd. if they are like TwoBobs and keep driving back and forth till 11 AM maybe a later start so we'll see Can't say more than that right now but we're doing some swapping of parts for sure ! No lifts though, we're getting serious now Hey, I resemble that remark!! I got a good look at the neighborhood, though. Pretty country around there If the 22nd is still on I'm gonna work on being at Mudd's Garage to lend a hand if needed. I can make a run for adult beverages if nothing else... Bob |
Author: | tommudd [ Mon Mar 17, 2014 6:17 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
Haven't been home for 4-5 days but last I heard we're still on for Saturday John any comments/updates/corrections???? |
Author: | John3:17 [ Mon Mar 17, 2014 6:30 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
tommudd wrote: Haven't been home for 4-5 days but last I heard we're still on for Saturday John any comments/updates/corrections???? Everything's set! See ya this weekend |
Author: | BugginKJ [ Wed Mar 19, 2014 9:55 am ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
This weekend?!?!?!?!?! Uhoh, I just may have to take a break around the old Hartbreak Ridge Compound and breeze out there to lend a hand. OHHHHHHH by the way Tom, I picked up a new SnapOn cordless 1/2" impact. Dang things works sweet, just big and a bit heavy but can bring it along. |
Author: | John3:17 [ Thu Mar 20, 2014 1:37 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
Just doing a few little things, come on over, always need an extra hand! And a few other odds and ends! |
Author: | BugginKJ [ Fri Mar 21, 2014 12:20 am ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
I hope he remembered to get all them turning shavings I put in there I picked up from the local brake shop. |
Author: | tommudd [ Sat Mar 22, 2014 6:56 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
TwoBobsKJ wrote: tommudd wrote: They are coming and we're doing some work to their KJ on the 22nd, possibly into the 23rd if needed. Depends on when they get here on the 22nd. if they are like TwoBobs and keep driving back and forth till 11 AM maybe a later start so we'll see Can't say more than that right now but we're doing some swapping of parts for sure ! No lifts though, we're getting serious now Hey, I resemble that remark!! I got a good look at the neighborhood, though. Pretty country around there If the 22nd is still on I'm gonna work on being at Mudd's Garage to lend a hand if needed. I can make a run for adult beverages if nothing else... Bob No Bob today............... But Buggin' saved the day |
Author: | tommudd [ Sat Mar 22, 2014 6:57 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
BugginKJ wrote: I hope he remembered to get all them turning shavings I put in there I picked up from the local brake shop. Those shavings could of caused some issues |
Author: | John3:17 [ Sat Mar 22, 2014 9:10 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
4:10's are in! But no 2Bobs and no Techman. KJWildman showed up to inspect the work. Many thanks to Tom for his expertise and cooking skills. And to SuperBugginKJ who showed up with the magical bolt removal thing that made the work go faster! We had a ball yall missed it! Would've went faster if Buggin wouldn't have put those metal shavings in the rear diff that caused all those problems. |
Author: | lfhoward [ Sat Mar 22, 2014 9:50 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
John, how does she drive now with the 4.10's??? Sounds like a good day was had by all. Congrats on your axle swap! Too bad there aren't any 4.10 axles out there for KK's because they never came with 4-cylinder engines. |
Author: | John3:17 [ Sat Mar 22, 2014 10:24 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
lfhoward wrote: John, how does she drive now with the 4.10's??? Sounds like a good day was had by all. Congrats on your axle swap! Too bad there aren't any 4.10 axles out there for KK's because they never came with 4-cylinder engines. It's got some snap(left some rubber behind in front of Mudd's Lol) but have only driven around the block sofar. Ill report back after I tackle some mountains on the way home. |
Author: | tommudd [ Sat Mar 22, 2014 11:52 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
John backed out, left about 35 foot of rubber in front of the house and then this happened How do we straighten out this mess now |
Author: | profdlp [ Sun Mar 23, 2014 12:21 am ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
We have a piece of modern "art" here in town that looks a lot like that. Every passing tow truck slows down thinking maybe they have a potential customer. |
Author: | BugginKJ [ Sun Mar 23, 2014 12:29 am ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
John3:17 wrote: Would've went faster if Buggin wouldn't have put those metal shavings in the rear diff that caused all those problems. I cursed the rear end before ya even had a chance to slap it Good news is ya now know ya also need to do rack bushings |
Author: | John3:17 [ Sun Mar 23, 2014 4:11 pm ] |
Post subject: | Re: 3/22/14 Working on a good friends KJ |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |