IL M&G/Lift Party - June 20th

oddball · **Posted:** Thu Jun 04, 2009 8:26 pm

I was planning on photographing the "party" too.

STINGN · **Posted:** Thu Jun 04, 2009 11:52 pm

before and after :twisted:

tan's2002kjlimited · **Posted:** Fri Jun 05, 2009 7:49 am

Jayme, how many gal air compressor do you have? My guns need a good capacity compressor to run. I've got the electric gun, too.

Logan · **Posted:** Mon Jun 08, 2009 3:03 pm

Hey guys, talked to all jeeps on friday the 5th and they said that my frankenlift should ship wed. The 10th. So it looks like every thing should be in order for me to be at the lift party to finally lift my jeep!

03kjsport · **Posted:** Mon Jun 08, 2009 8:27 pm

congrts logan. howd ya swindle yur parents into that?

Logan · **Posted:** Tue Jun 09, 2009 1:19 pm

03kjsport wrote:

congrts logan. howd ya swindle yur parents into that?

well the carmax warranty finally was up and i saved enough to buy it myself so they agreed and said go ahead!

ihatemybike · **Posted:** Tue Jun 09, 2009 2:54 pm

tan's2002kjlimited wrote:

Jayme, how many gal air compressor do you have? My guns need a good capacity compressor to run. I've got the electric gun, too.

The compressor will run impact guns, just don't expect NASCAR speed tire changes.

Logan · **Posted:** Tue Jun 09, 2009 5:07 pm

1. yellocoyote/ihatemybike - provide tools/assistance/possible clevis lift - burgers w/ fixin's
2. oddball - provide assistance - potato salad & pasta salad. (Jewel deli).
3. jeepfrog/overclocked - tranny skid/O2 sensor/some OJT - I can bring some marinated chicken breasts (boneless) we can grill up, too.
4. tan's2002kjlimited - lift & UCA's - whatever you need me to bring, tools, food, beverages,
5. STINGN - Another hand, I got quite a bit of tools, a large compressor, air tools. I can bring a few bags O' chips (suggestions open!!) and I'm also getting a CB, new battery (WHAT KIND SHOULD I GET) and capacitor for sub
6. Logan - Frankenlift Standard & Mounted KM2'S - Chips, pop, Cookies anything else?

STINGN · **Posted:** Tue Jun 09, 2009 5:53 pm

KM2's!!! lucky!!!

timmyb457 · **Posted:** Wed Jun 10, 2009 2:51 am

i was gonna come to give a hand with everything but i just found out that i have to go to a wedding that day..... so it looks like i still wont get to meet any of you

ihatemybike · **Posted:** Wed Jun 10, 2009 7:32 am

Since we are replacing an UCA, I ask that if any of you have an air hammer, please bring it. We didn't need it on YC's, but it was very handy pushing the stuck driver's rear mounting bolt on Callaway's out.

ihatemybike · **Posted:** Wed Jun 10, 2009 7:36 am

Added a new tool to the stable. I have one of the Harbor Freight tire changers now. So if anyone needs tires mounted it can be done. I might pick up a supply of airsoft pellets for bead balancing too.

STINGN · **Posted:** Wed Jun 10, 2009 12:49 pm

ihatemybike wrote:

Added a new tool to the stable. I have one of the Harbor Freight tire changers now. So if anyone needs tires mounted it can be done. I might pick up a supply of airsoft pellets for bead balancing too.

you telling me that my tires can be swapped from the white showing to not showing????

ihatemybike · **Posted:** Wed Jun 10, 2009 12:58 pm

STINGN wrote:

ihatemybike wrote:

Added a new tool to the stable. I have one of the Harbor Freight tire changers now. So if anyone needs tires mounted it can be done. I might pick up a supply of airsoft pellets for bead balancing too.

you telling me that my tires can be swapped from the white showing to not showing????

Yes, but do note that the only balancing method I have available is bead balancing.

oddball · **Posted:** Wed Jun 10, 2009 5:46 pm

ihatemybike wrote:

Since we are replacing an UCA, I ask that if any of you have an air hammer, please bring it. We didn't need it on YC's, but it was very handy pushing the stuck driver's rear mounting bolt on Callaway's out.

I personally do not have one, but I'll see if I can come up with one - that is if no one else has one?

callaway · **Posted:** Wed Jun 10, 2009 5:57 pm

Plans might be changing, might be able to make this. If I do I'll bring my compressor and air tools.

Jayme can your garage handle an additional 15 amp compressor ?

Logan · **Posted:** Wed Jun 10, 2009 6:27 pm

callaway wrote:

Plans might be changing, might be able to make this. If I do I'll bring my compressor and air tools.

Jayme can your garage handle an additional 15 amp compressor ?

great news rob, i was just about to message you and let you know that i am going to do my lift at the meet and greet. hopefully you can make it!

tan's2002kjlimited · **Posted:** Wed Jun 10, 2009 7:52 pm

I also have a 12 amp/6 gal. compressor, and the needed air hammer, bits etc., air and electric impact guns, air drill, if needed in addition to what I brought last time :wink:

I have 2 jack stands, and the big jack. Some more jacks stands, some know-how, helping hands, and we can knock a couple of lifts out.

wingnuts · **Posted:** Wed Jun 10, 2009 8:05 pm

I wonder if I can get my AEM intake by this happens, I can install it while I watch you all do some lifts, I can also manage the food and you all work and I eat it.

tan's2002kjlimited · **Posted:** Wed Jun 10, 2009 8:12 pm

wingnuts wrote:

I can also manage the food and you all work and I eat it.

Don't worry, I haven't gotten to the size I am by not eating. :wink:

IL M&G/Lift Party - June 20th

Who is online