| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need help fixing the KJ ASAP http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=114&t=57271 |
Page 1 of 1 |
| Author: | lionseye640 [ Thu Dec 02, 2010 3:52 pm ] |
| Post subject: | Need help fixing the KJ ASAP |
I have got to finish fixing the KJ but the person who helped me take it apart won't help put it back together and I'm shall we say mechanically challenged lol anyways I need to install new cvs, carrier bearings for the front dif (although I'm willing to hold off on this just to have 4 wheel drive with the upcoming snow) and new bushings for the lower control arms. I would really love if someone could help me out. I'll buy food and beer -Ann |
|
| Author: | tommudd [ Thu Dec 02, 2010 4:00 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
So its already torn down? And in a very nice and warm garage? Wish I was closer and not heading out of town in the AM Bushings in the LCAs will have to be pressed in or buy new LCAs Carrier bearings? CV is a easy thing to do, do you have a new one yet? |
|
| Author: | lionseye640 [ Thu Dec 02, 2010 4:21 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
tommudd wrote: So its already torn down? And in a very nice and warm garage? Wish I was closer and not heading out of town in the AM Bushings in the LCAs will have to be pressed in or buy new LCAs Carrier bearings? CV is a easy thing to do, do you have a new one yet? all is torn down, it's just time to put all the new parts in! I've got all the parts rattling around in my cargo area (rattling for over a month now, sadly). Tom, I'd drive to OH if you weren't heading out as for carrier bearing - it's the bearing that the cv goes "into" where the cv rests into the front dif. Somehow mine is all tore up - tons of metal shavings were evident when I took the old passenger side cv out. Sadly I have no jack, stands, tools or garage. |
|
| Author: | STINGN [ Thu Dec 02, 2010 5:15 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
if you want you can come over to my place this weekend (saturday) i have never installed cvs and stuff but im sure aaron or jayme could come by too since your close to me (5 minutes) i have a garage, jack stands and such too. let me know Steve ps, i saw u today lol |
|
| Author: | lionseye640 [ Thu Dec 02, 2010 5:29 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
STINGN wrote: if you want you can come over to my place this weekend (saturday) i have never installed cvs and stuff but im sure aaron or jayme could come by too since your close to me (5 minutes) i have a garage, jack stands and such too. let me know Steve ps, i saw u today lol I thought that was you! Lol I keep seeing you around town you serious? I'd LOVE the help! If you want to, give me a call and we can work out details. 847-804-4352 |
|
| Author: | ihatemybike [ Thu Dec 02, 2010 5:32 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
Unfortunately, I'm out of town this weekend. Not sure if Jayme is able to come supervise. The CVs can be done in an evening. Together Jayme and I can change out both sides in less than two hours. Not sure about the lower A arm bushings, haven't had to do them yet. Might be able to pull the arms and run over to a suspension shop to get them pressed in. You will need an alignment after. The carrier bearings will be a pain with the diff in the vehicle. If you and Steve decide to tackle this I can help with phone support. |
|
| Author: | lionseye640 [ Thu Dec 02, 2010 5:39 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
ihatemybike wrote: Unfortunately, I'm out of town this weekend. Not sure if Jayme is able to come supervise. The CVs can be done in an evening. Together Jayme and I can change out both sides in less than two hours. Not sure about the lower A arm bushings, haven't had to do them yet. Might be able to pull the arms and run over to a suspension shop to get them pressed in. You will need an alignment after. The carrier bearings will be a pain with the diff in the vehicle. If you and Steve decide to tackle this I can help with phone support. WOOT! You're like an over the phone, But not in India IT guy now lol |
|
| Author: | lionseye640 [ Thu Dec 02, 2010 6:06 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
yellocoyote wrote: I can come by on Saturday afternoon/evening or anytime on Sunday. Once you guys get the day/time figured out, someone give me a call and I'll come lend a hand. I have plans on Saturday morning-mid afternoon, FYI. Sunday would be better. But someone let me know and I'll make every effort to get there. Ann - I assume you're still running without both CV's in? Have you drained the front diff at all? If not we will do that too. Especially since you were seeing shavings before. Make sure you pick up new gear oil ahead of time. We'll have to see what we can do about the bushings... jayme you rock! Still mall crawler right now with both front cvs out. Haven't drained the fluid, but I'll make sure to have that too. Bushings are soooo the least of my worries. I feel like my KJ is dying a slow and (to me) painful death though. And it's only been wheeled three times! Go figure... |
|
| Author: | STINGN [ Thu Dec 02, 2010 6:48 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
saturday i will be home by 3pm...so you can come over when ever you want after that. ill give you my address |
|
| Author: | KJ Willy [ Thu Dec 02, 2010 7:34 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
Post up time and place and I may swing down to lend a hand and meet some people. |
|
| Author: | lionseye640 [ Thu Dec 02, 2010 7:43 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
KJ Willy wrote: Post up time and place and I may swing down to lend a hand and meet some people. Steve, time & place is all you I really appreciate all y'alls help! Just let me know what drinks everyone wants and I'll bring 'em. it's the least I can do. |
|
| Author: | STINGN [ Thu Dec 02, 2010 7:56 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
this is like an unintentional meet and greet now haha good thing Ann saw my jeep and felt envious of my 4 wheel drive |
|
| Author: | lionseye640 [ Thu Dec 02, 2010 8:07 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
STINGN wrote: this is like an unintentional meet and greet now haha good thing Ann saw my jeep and felt envious of my 4 wheel drive See you all 3pm at Steves. Steve, thanks for offering your garage. To all else, thanks for your help fixing the KJ, and I can't wait to see you all on Saturday! |
|
| Author: | KJ Willy [ Thu Dec 02, 2010 10:49 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
I should be there, as of now no plans. Looking forward to meeting all that show up. |
|
| Author: | STINGN [ Sun Dec 05, 2010 2:04 am ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
got it pretty close...just needs new ball joints |
|
| Author: | KJ Willy [ Sun Dec 05, 2010 2:32 am ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
It was good to meet everyone, and had a good time, wish it was warmer, had to leave my seat warmers on the majority of the ride back to WI to unfreeze my @$$. Lionseye, how was the ride home? |
|
| Author: | lionseye640 [ Sun Dec 05, 2010 12:44 pm ] |
| Post subject: | Re: Need help fixing the KJ ASAP |
Thanks again Jayme, Will and Steve! I really appreciate all your help yesterday! The drive home was uneventful. I'll be testing out the 4wheel drive a little later today and let you know how that works. Still some clunks, creaks and pops (presuming that's ball joint and sway bar link related sounds though). I'll be ordering lower ball joints later this week, and hopefully getting that sway bar link bolt. Hope everyone finally warmed up! I'm thinking I need to pickup my spaceheater from my parents house next time |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|