Even though I have a CRD with a Magnaflow Cat back 2 1/2" system, when I get up to 65MPH all I hear is loud tire/road noise. I still have the stock Goodyear Wranglers and I run 40PSI in the tires due to the extra weight of the CRD engine. If the Brush Strokes run across the pavement from side to side tire/road noise is so loud I can't hear my Wife talk, the engine run, and have to turn up the radio to hear it. Go to another section of road where the Brush Strokes go the direction of travel and the noise drops to an acceptable level.
On Black Top the tire/road noise is also acceptable.
Any ideas to reduce the tire/road noise when driving on these concrete roads that have the brush strokes going cross wise?
_________________ 2006 Pearl Green CRD Magnaflow 2 1/2" Cat Back KJ Extra Leg Room Brackets, Carter Lift Pump, V6 Airbox, ORM Fuel cooler, Oil Separator, Progard 7 Gauges EGT Boost Trans Temp Oil Pres, Michelin LXT AT2 245 70 R16 7,000# Draw Tight hitch, PML EX Deep Trans Pan Centrifuge, SunCoast, Transgo, RAM TCM, InMotion Stage 2 Wife's 99 TDI VW Beetle
|