So I'm getting closer to finishing up my flares. When they are done they will be E-Coated with a black primer. Ready for paint. Should I paint them Red to match the KJ, Black to match everything else or .... here it comes .... LINE-X?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Fender Flares http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=12&t=50788 |
Page 1 of 1 |
| Author: | KJWildman [ Sat Mar 06, 2010 3:57 pm ] |
| Post subject: | Fender Flares |
So I'm getting closer to finishing up my flares. When they are done they will be E-Coated with a black primer. Ready for paint. Should I paint them Red to match the KJ, Black to match everything else or .... here it comes .... LINE-X?
|
|
| Author: | TAHOE [ Sat Mar 06, 2010 4:45 pm ] |
| Post subject: | Re: Fender Flares |
Somebody photoshop the different colors for us so we can vote better....!!!! 
|
|
| Author: | STINGN [ Sat Mar 06, 2010 5:46 pm ] |
| Post subject: | Re: Fender Flares |
black or line-x...no red, does not match bumper |
|
| Author: | KJWildman [ Sat Mar 06, 2010 5:46 pm ] |
| Post subject: | Re: Fender Flares |
If somebody could, go ahead and do that. 
|
|
| Author: | Diggerfreek [ Sat Mar 06, 2010 6:24 pm ] |
| Post subject: | Re: Fender Flares |
Line X
|
|
| Author: | 501 [ Sat Mar 06, 2010 8:27 pm ] |
| Post subject: | Re: Fender Flares |
I'd paint them black (or powder coat them black) and also paint inside the wheel well black. Looks great Larry! |
|
| Author: | BugginKJ [ Sun Mar 07, 2010 12:43 am ] |
| Post subject: | Re: Fender Flares |
What would be wrong with leaving them in the black e coating? Black is my vote any way 
|
|
| Author: | KJWildman [ Sun Mar 07, 2010 12:54 am ] |
| Post subject: | Re: Fender Flares |
BugginKJ wrote: What would be wrong with leaving them in the black e coating? Black is my vote any way The Electrocoat (E-Coat) we do is a Black PPG primer. 9 Stage pre-treatment, zinc phosphate coating , rinsed then dipped in an electrically charged 20,000 gallon tank with 235V DC then baked at 425 deg. for 35 minutes. But its just a primer. We also powdercoat but only 2 colors, Black or Black! 
|
|
| Author: | 501 [ Sun Mar 07, 2010 1:02 am ] |
| Post subject: | Re: Fender Flares |
KJWildman wrote: We also powdercoat but only 2 colors, Black or Black! Tough choice there... but I think I'd go with Black! |
|
| Author: | KJWildman [ Sun Mar 07, 2010 2:03 am ] |
| Post subject: | Re: Fender Flares |
Actually 3  Black - Epoxy Base Black - Polyester Base Black - Graphite Base 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|