It is currently Thu Mar 28, 2024 9:12 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 46 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: Possible Service Bulletin Update for Window Regulators
PostPosted: Sat Jul 19, 2014 5:07 pm 
Offline
LOST Newbie

Joined: Sun Apr 22, 2012 7:53 pm
Posts: 59
is there an reliable fix for this yet? i am the original owner of an 06 and have the two rear windows proped up with boards inside the door frame. my local dealership says there are no recalls our changes? :furious:

_________________
06 CRD lmtd Blacked out
Renegade lightbar curt rack
moose tool boxes GDE
pinch welds ham SC t conv
3.7 fan egr del
steel glow plugs Frankenlifted
samco
gen. grab at2 30.5x10



mpg 24.6

This is my Jeep there are many like it but this one is mine!


Top
 Profile  
 
 Post subject: Re: Possible Service Bulletin Update for Window Regulators
PostPosted: Sat Jul 19, 2014 8:43 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
Best solution I found; Autozone has the complete regulator assembles with new motors for very reasonable price. And to top it off, a lifetime warranty. I have already used the warranty on my left rear window that I replaced last year after it started making a popping sound this year when it went fully closed. They asked no questions, just gave me a new one and asked me to bring them the defective regulator after I removed it.... :D
I have gotten quite good at replacing them; about 30 minutes start to finish.....it is not a real bad job in the scheme of things.... :SOMBRERO:
WW

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Possible Service Bulletin Update for Window Regulators
PostPosted: Thu Sep 25, 2014 4:09 pm 
Offline
LOST Newbie

Joined: Sat Sep 27, 2008 5:31 pm
Posts: 10
kjstinga wrote:
I am having a 10th window regulator replaced Thursday. So far all under warranty. This is absolutely ridiculous as I have had this passenger rear one done in July 2009, again in August 2009, and now June 2010. This is definitely not a resistance problem as I never use the rear windows; the glass just all of a sudden drops into the door.

I would like to hear from folks that have installed the Steiger metal parts to fix this and have some time on the windows. How are they holding up? Chrysler will never fix this properly and once I am out of warranty, I need a real fix short of blocking up the windows.


I have had the steiger fix installed in my rear driver side window on my 2005 sport for 4-5 years now and have NEVER had another problem on that window. I purchased 3 more for the other windows, just waiting to install them.


Top
 Profile  
 
 Post subject: Re: Possible Service Bulletin Update for Window Regulators
PostPosted: Fri Sep 26, 2014 12:08 am 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
I used the steiger knock off from ebay on 3 out of 4 on mine. The other one is a steiger. No problems from either

Sent with the power of children's screams!!!

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Possible Service Bulletin Update for Window Regulators
PostPosted: Fri Sep 26, 2014 10:20 pm 
Offline
LOST Member

Joined: Fri Sep 05, 2014 12:22 pm
Posts: 393
Location: north central Nebraska
Tackled my passenger front today.. really expecting to find a busted clip.. nope, snapped cable. Also admired the 3/4 inch pvc tube PO used to prop the window up. From reading in here.... I'll keep the tube handy for future use!

sooooo, are the ~ $50 regulators worth a dang? Dorman used to sell pretty good stuff, but is it all far east BS these days?

_________________
2006 KJ CRD, bought 9/11/14, 70,500 miles. Circulating Rotella T6 5w-40
11-3-14 oem stat installed
11-5-14 gen II FH installed.
Sasquatch elbow kit, samcos, GDE eco FT. 11-26-14
80,500 miles, engine is disassembled, awaiting parts 3/18
Budget?? Sure! 'Everything I have'.
New "Pet" name for My Jeep; 'Soul Sucker'


Top
 Profile  
 
 Post subject: Re: Possible Service Bulletin Update for Window Regulators
PostPosted: Wed Dec 10, 2014 4:35 am 
Offline
Lifetime Member
Lifetime Member

Joined: Fri Mar 07, 2008 6:33 am
Posts: 425
Location: British Columbia
I went with the Steiger regulator kits two years ago after two window failures within one month. Never had a single problem since they were put in. Steiger customer service is great. I had a mixture of regulator kits in my Jeep and he was great at helping me sort the mess out so the correct kits were sent up to Canada.

_________________
2006 KJ Sport, Dark Khaki, 3.7 Litre
NSG370 6 Speed Manual Transmission | NP241J Command Trac HD Part Time 4wd | 3.55s | 245/70R16 Firestone Destination A/Ts | Mopar Tow Hooks & Skids | Powerslot Brake Rotors | ARB Rear Differential Cover


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 46 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com