My mom was driving the car yesterday, rolled the window down about halfway and found it wouldn't go back up.
The window switch for the passenger window works, but the drivers window is not responding... is the switch bad ?

_________________
2008 Xterra 4x4

1986 CJ7
Lots of custom stuff...

Gone, But not Forgotten...
2003 Sport - 'Fire Engine' Red
Detours KJ Backbone
Skids
Boulder Bars
JBA 4.5 A Arms
245/75/16 Wrangler Duratracs's on Cragar Soft 8’s
Spidertrax 1.25" Spacers
Superwinch LP 8500
Frankenlifted

Could be a few things.

1. bad switch
2. bad contacts in the switch. some are servicable
3. bad motor
4. dirty track
5. bound up track...

_________________
2008 Liberty Limited 4X4 Command Trac 2
All stock Auto with 235/60/18

Sounds like you just need to get rid of that heap



Being a Ford...it has that first generation one-touch-down stuff doesn't it?

Sounds like it.


I had the same problem on a 94 taruas, had to open up the drivers door, find the little one touch down box, and I by passed two different pins on the box, if I had been competent with a soldering iron I could have soldered the resistors that controlled the thing back onto the board.

You may have a similar problem.

_________________
http://www.Colorado4Wheel.com
"Its not about what you can DO with your Jeep, its about where you can GO with your Jeep."
Knowledgeable - But Caustic