LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Total Proof that Pot Heads don't run EPA/CARB
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=15&t=60131
Page 1 of 1

Author:  warp2diesel [ Wed Apr 13, 2011 7:48 pm ]
Post subject:  Total Proof that Pot Heads don't run EPA/CARB

If they did, this article would never have gotten published!!!
http://www.bizjournals.com/sanfrancisco ... ?ana=e_pft

:ROTFL: :ROTFL:

Author:  KJ 119 [ Thu Apr 14, 2011 10:42 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

I bet Warp is a total pot head/acid junkie and posts all this stuff to throw off the feds.

Just a hunch. :mrgreen:

Author:  warp2diesel [ Sat Apr 16, 2011 6:09 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

KJ 119 wrote:
I bet Warp is a total pot head/acid junkie and posts all this stuff to throw off the feds.

Just a hunch. :mrgreen:


WRONG, all I use is COFFEE (Legal drug of Choice), sorry to disappoint you.

Besides I have a Federal License to be a Gunsmith, if there is one Government Agency that hates Pot and Acid Heads, it is the BATFE.

So, if you made any bets, you loost and better pay up.

Author:  BugginKJ [ Sat Apr 16, 2011 7:39 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

BATFE- bunch of wacked out tweekin crack heads, oh ya another government bureauracy, what else is to be expected :roll: ...........

Author:  warp2diesel [ Sat Apr 16, 2011 9:28 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

BugginKJ wrote:
BATFE- bunch of wacked out tweekin crack heads, oh ya another government bureauracy, what else is to be expected :roll: ...........


Yup, they could not catch a cold in an isolation ward either, I just have the FFL so I can buy the parts I don't have time to make.
To help pay the License fee, I do transfers too for fellow gun owners.

Author:  Sir Sam [ Thu Apr 21, 2011 11:37 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

Huh thats interesting. I bet your the "popular" friend when someone wants to buy a lower from an armory and needs someone with a FFL.

Author:  warp2diesel [ Sat Apr 23, 2011 9:46 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

Sir Sam wrote:
Huh thats interesting. I bet your the "popular" friend when someone wants to buy a lower from an armory and needs someone with a FFL.

Yup, last month one guy bought two composite lower receivers for an AR-15 clone for cheap. He got them for one transfer since he got them from the same dealer.

Author:  Sir Sam [ Sun Apr 24, 2011 9:50 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

warp2diesel wrote:
Sir Sam wrote:
Huh thats interesting. I bet your the "popular" friend when someone wants to buy a lower from an armory and needs someone with a FFL.

Yup, last month one guy bought two composite lower receivers for an AR-15 clone for cheap. He got them for one transfer since he got them from the same dealer.


I started looking into the composite lower since the price is right and its fine for what I want out of it, plus if you ever wanna upgrade its easy to do in the future.

Author:  warp2diesel [ Mon Apr 25, 2011 2:31 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

Sir Sam wrote:
warp2diesel wrote:
Sir Sam wrote:
Huh thats interesting. I bet your the "popular" friend when someone wants to buy a lower from an armory and needs someone with a FFL.

Yup, last month one guy bought two composite lower receivers for an AR-15 clone for cheap. He got them for one transfer since he got them from the same dealer.


I started looking into the composite lower since the price is right and its fine for what I want out of it, plus if you ever wanna upgrade its easy to do in the future.


Just don't drill the extra little hole in the Receiver, that is a Federal No No.

Author:  Sir Sam [ Tue Apr 26, 2011 11:46 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

warp2diesel wrote:
Sir Sam wrote:
warp2diesel wrote:
Yup, last month one guy bought two composite lower receivers for an AR-15 clone for cheap. He got them for one transfer since he got them from the same dealer.


I started looking into the composite lower since the price is right and its fine for what I want out of it, plus if you ever wanna upgrade its easy to do in the future.


Just don't drill the extra little hole in the Receiver, that is a Federal No No.


Me drill? 8)

Author:  KJ 119 [ Wed Apr 27, 2011 6:56 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

Sir Sam wrote:
Me drill? 8)


You drill...8)

Author:  warp2diesel [ Wed Apr 27, 2011 11:51 pm ]
Post subject:  Re: Total Proof that Pot Heads don't run EPA/CARB

KJ 119 wrote:
Sir Sam wrote:
Me drill? 8)


You drill...8)


Where not to drill unless you like to get a Manufacturers FFL and only make the part for the Military or like going to Federal Prison. BATFE can't catch a cold in an isolation ward of a Hospital, but the will catch you.
I machined a Semi Auto version out of a 7075 T6 forging, but I did not drill the little hole shown in the pic below, I put a big X through the hole on the copy I used in my shop, just to play it safe. Then I stamped in a serial number to make it legal.
I am not a Lawyer, but don't drill that hole :!: :banghead:
Unless you work for CARB/EPA and make sure you post yourself drilling the hole on Youtube with your name and local preferably California address so BATFE and the CHIPS can give you a joint visit. :ROTFL: :ROTFL:

Image

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/