I remember somebody saying that there should be a tech article on the torque specifications and socket sizes for all the major parts on the Jeep Liberty. So, I created a new page on WikiBooks that has a table of this and if anyone wants to add to it feel free, or if your not experienced in the HTML coding post it on here and I can do it for you.

http://en.wikibooks.org/wiki/Jeep_Liber ... cket_Sizes

Each time I have a project/maintenance to do on my KJ, I will write down what socket I used and expand the list some more. Thanks everyone!

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650

Helped you out some.................



Socket Size Torque Spec
Battery Terminal Clamps 10mm
Engine Pan Drain Plug --mm ---------13mm
Front Axle Hub Nut 35mm 100 lbs-ft
Front Ball Joint Nut (Upper) --mm -----OEM=21mm-----60lbs-ft
Front Ball Joint Nut (Lower) --mm ------OEM=21mm -------60lbs-ft
Front Clevis Bolt (Upper) --mm ------21mm--------100lbs-ft
Front Clevis Bolt (Lower) --mm ------21mm-------100lbs-ft
Front Control Arm (Upper) --mm ------18mm-------80lbs-ft
Front Control Arm (Lower) --mm ------19mm and 24mm--------120lbs-ft
Front Differential Drain Hole 8mm Allen Wrench
Front Differential Fill Hole 3/8" Ratchet
Front Sway Bar Bushing Mount --mm ------15mm or 18mm
Front Sway Bar End Link (Upper) --mm ------15mm(bolt) and 18mm(nut)
Front Sway Bar End Link (Lower) --mm ------18mm
Front Sway Bar End Link (Upper) --mm
Front Tow Hook --mm -----15mm
Front Engine Skid 18mm Deep Socket -------mine came with 15mm bolts
Fuel Tank Skid --mm ------18mm
Ignition Coil Nut --mm -------10mm
Rear Axle Hub Nut 35mm------no such thing
Rear Control Arm (Lower) --mm
Rear Control Arm/Tri-Link (Upper) --mm
Rear Differential Cover Bolts --mm -------13mm
Rear Pinion Nut --mm -------1 1/8"
Rear Shock Mount (Lower) --mm -------15mm(bolt) and 18mm(nut)
Rear Shock Mount (Upper) --mm ------15mm
Rear Tow Hook --mm -------18mm
Rear U-Joint Strap --mm -------8mm
Spark Plugs --mm --------5/8"
Tensioner Pulley 15mm
Transfer Case Drain Hole --mm -------3/8" allen
Transfer Case Fill Hole --mm ---------3/8" allen
Transfer Case Skid --mm-------OEM=15mm
Transmission Cover Bolts --mm
Transmission Skid --mm--------OEM=15mm

^WoW...thanks! ^

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650

If anybody thinks of any other parts to add, post here and I can add it, or feel free to add it yourself. Thanks.

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650

Engine
Socket Size Torque Spec
Battery Terminal Clamps 10mm 6 lbs-ft
Engine Pan Drain Plug 13mm 25 lbs-ft
Engine Skid 15mm Deep Socket 45 lbs-ft
Ignition Coil Mounting Nut 10mm 6 lbs-ft
Spark Plugs 5/8" Spark Plug Socket 20 lbs-ft
Tensioner Pulley 15mm
Thermostat Housing Bolts --mm 9 lbs-ft
Water Pump Bolts --mm 40 lbs-ft


Steering
Socket Size Torque Spec
Rack & Pinion Frame Mount 24mm 120 lbs-ft
Rack & Pinion Intermediate Shaft Bolt --mm 36 lbs-ft
Power Steering Pressure Line --mm 25 lbs-ft
Power Steering Return Line --mm 25 lbs-ft
Tie Rod End Knuckle Nut 21mm 80 lbs-ft
Tie Rod End Jam Nut --mm 55 lbs-ft


Front Differential/Suspension
Socket Size Torque Spec
Front Axle Hub Nut 35mm 100 lbs-ft
Front Ball Joint Nut (Upper) 21mm 60 lbs-ft
Front Ball Joint Nut (Lower) 21mm 60 lbs-ft
Front Clevis Bolt (Upper) 21mm 100 lbs-ft
Front Clevis Bolt (Lower) 21mm 100 lbs-ft
Front Control Arm (Upper) 18mm 80 lbs-ft
Front Control Arm (Lower) 19mm & 24mm 120 lbs-ft
Front Differential Bearing Cap Bolts --mm 47-67 lbs-ft
Front Differential Drain Hole 8mm Allen Wrench 15 lbs-ft
Front Differential Fill Hole 3/8" Ratchet 15 lbs-ft
Front Differential Pinion Nut --mm 200 lbs-ft
Front Differential Ring Gear Bolts --mm 95-105 lbs-ft
Front Shock/Strut Mounting Nuts 18mm 80 lbs-ft
Front Sway Bar Bushing Mount 18mm 110 lbs-ft
Front Sway Bar End Link Bolt (Upper) 15mm 100 lbs-ft
Front Sway Bar End Link Nut(Upper) 18mm 100 lbs-ft
Front Sway Bar End Link (Lower) 18mm 85 lbs-ft


Rear Differential/Suspension
Socket Size Torque Spec
Rear Ball Joint Bracket Bolts --mm 100 lbs-ft
Rear Ball Joint Nut --mm 70 lbs-ft
Rear Control Arm (Lower) --mm 120 lbs-ft
Rear Control Arm/Tri-Link Bolts (Upper) --mm 74 lbs-ft
Rear Differential Bearing Cap Bolts --mm 100 lbs-ft
Rear Differential Cover Bolts 13mm 30 lbs-ft
Rear Differential Pinion Nut 1-1/8" 210 lbs-ft
Rear Differential Ring Gear Bolts --mm 70 lbs-ft
Rear Shock Mount Bolt (Lower) 15mm 85 lbs-ft
Rear Shock Mount Nut (Lower) 18mm 85 lbs-ft
Rear Shock Mount (Upper) 15mm 80 lbs-ft
Rear Sway Bar Bolts --mm 73 lbs-ft
Rear U-Joint Strap 8mm 13 lbs-ft


Transmission/Transfer Case
Socket Size Torque Spec
Transfer Case Drain/Fill Hole 3/8" Allen 15-25 lbs-ft
Transfer Case Skid (OEM) 15mm 25 lbs-ft
Transmission Cover Bolts 8mm 8-9 lbs-ft
Transmission Skid (OEM) 15mm 45 lbs-ft


Other
Socket Size Torque Spec
Front Tow Hook 15mm 45 lbs-ft
Fuel Tank Skid 18mm 65 lbs-ft
Lug Nuts 1/2" x 20 RH 85-110 lbs-ft
Rear Tow Hook 18mm 65 lbs-ft
Trailer Hitch Bolts 18mm 65 lbs-ft

Retrieved from "http://en.wikibooks.org/wiki/Jeep_Liberty/Torque_Specs_%26_Socket_Sizes"

_________________
1980 Jeep CJ7 Buggy
SOA, D44/ FF14B, SBC 350, SM465, NP205, 108" WB, 37" MTs

http://www.dpgoffroad.com/
http://www.ucora.org/
http://www.christianoffroad.com/
http://jeepinbyal.com/

Thanks guys!
Ive had a clunk in mine over large speed bumps. Going to check all of these to insure torque is acurate

Where can I find a list of torque specs for the Liberty?

Looking for torque specs for a 2006 Jeep Liberty CRD 2.8 liter diesel.

transfer case cross member bolts, 3 on either end M10x1.5

power steering pump to bracket bolts - 3 little bolts.

Power steering pump pulley - 3 little bolts

Aluminum wheels lug nuts - 100 ft lbs. This I have not verified anywhere

power steering pump / serpentine belt bracket tensioner to block bolts - 3 each. - 35 foot lbs

Tensioner to power steering pump / serpentine belt bracket bolt. 43.6672 ft lbs or 47 Nm

What is the correct name for the power steering pump / serpentine belt bracket? It is called either or in different parts of the books part number Mopar 05093935AA

Is there a place to find all these torque specs AND MORE?

Somebody mentioned that there is a European manual online that is much easier and more detailed than than the 3 manual set. I haven't found it yet

Thank you much.

_________________
2006 Jeep Liberty CRD 142,000 miles New engine 2-2014, Green Eco tune, FS2500 bypass filter Weeks elbow, European Torque converter, brakes front UCA's wheel bearing and front hubs. Front hitch OEM lift pump
98 K2500 Suburban 6.5td
96 K1500 " 6.5td
95 2 door Tahoe 6.5td
94 K3500 cc srw 5 speed 6.5td
91 International Model 6 speed spicer 4700

They will be in here. you can download and save to access faster in the future.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770