LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Socket Size and Torque Specifications http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=31005 |
Page 1 of 1 |
Author: | jeepkj02 [ Fri Mar 28, 2008 10:21 pm ] |
Post subject: | Socket Size and Torque Specifications |
I remember somebody saying that there should be a tech article on the torque specifications and socket sizes for all the major parts on the Jeep Liberty. So, I created a new page on WikiBooks that has a table of this and if anyone wants to add to it feel free, or if your not experienced in the HTML coding post it on here and I can do it for you. http://en.wikibooks.org/wiki/Jeep_Liber ... cket_Sizes Each time I have a project/maintenance to do on my KJ, I will write down what socket I used and expand the list some more. Thanks everyone! |
Author: | tjkj2002 [ Fri Mar 28, 2008 10:52 pm ] |
Post subject: | |
Helped you out some................. Socket Size Torque Spec Battery Terminal Clamps 10mm Engine Pan Drain Plug --mm ---------13mm Front Axle Hub Nut 35mm 100 lbs-ft Front Ball Joint Nut (Upper) --mm -----OEM=21mm-----60lbs-ft Front Ball Joint Nut (Lower) --mm ------OEM=21mm -------60lbs-ft Front Clevis Bolt (Upper) --mm ------21mm--------100lbs-ft Front Clevis Bolt (Lower) --mm ------21mm-------100lbs-ft Front Control Arm (Upper) --mm ------18mm-------80lbs-ft Front Control Arm (Lower) --mm ------19mm and 24mm--------120lbs-ft Front Differential Drain Hole 8mm Allen Wrench Front Differential Fill Hole 3/8" Ratchet Front Sway Bar Bushing Mount --mm ------15mm or 18mm Front Sway Bar End Link (Upper) --mm ------15mm(bolt) and 18mm(nut) Front Sway Bar End Link (Lower) --mm ------18mm Front Sway Bar End Link (Upper) --mm Front Tow Hook --mm -----15mm Front Engine Skid 18mm Deep Socket -------mine came with 15mm bolts Fuel Tank Skid --mm ------18mm Ignition Coil Nut --mm -------10mm Rear Axle Hub Nut 35mm------no such thing Rear Control Arm (Lower) --mm Rear Control Arm/Tri-Link (Upper) --mm Rear Differential Cover Bolts --mm -------13mm Rear Pinion Nut --mm -------1 1/8" Rear Shock Mount (Lower) --mm -------15mm(bolt) and 18mm(nut) Rear Shock Mount (Upper) --mm ------15mm Rear Tow Hook --mm -------18mm Rear U-Joint Strap --mm -------8mm Spark Plugs --mm --------5/8" Tensioner Pulley 15mm Transfer Case Drain Hole --mm -------3/8" allen Transfer Case Fill Hole --mm ---------3/8" allen Transfer Case Skid --mm-------OEM=15mm Transmission Cover Bolts --mm Transmission Skid --mm--------OEM=15mm |
Author: | jeepkj02 [ Sat Mar 29, 2008 10:05 am ] |
Post subject: | |
^WoW...thanks! ^ |
Author: | jeepkj02 [ Sat Mar 29, 2008 10:23 am ] |
Post subject: | |
If anybody thinks of any other parts to add, post here and I can add it, or feel free to add it yourself. Thanks. |
Author: | jsc7002 [ Wed Apr 23, 2008 3:49 pm ] |
Post subject: | |
Engine Socket Size Torque Spec Battery Terminal Clamps 10mm 6 lbs-ft Engine Pan Drain Plug 13mm 25 lbs-ft Engine Skid 15mm Deep Socket 45 lbs-ft Ignition Coil Mounting Nut 10mm 6 lbs-ft Spark Plugs 5/8" Spark Plug Socket 20 lbs-ft Tensioner Pulley 15mm Thermostat Housing Bolts --mm 9 lbs-ft Water Pump Bolts --mm 40 lbs-ft Steering Socket Size Torque Spec Rack & Pinion Frame Mount 24mm 120 lbs-ft Rack & Pinion Intermediate Shaft Bolt --mm 36 lbs-ft Power Steering Pressure Line --mm 25 lbs-ft Power Steering Return Line --mm 25 lbs-ft Tie Rod End Knuckle Nut 21mm 80 lbs-ft Tie Rod End Jam Nut --mm 55 lbs-ft Front Differential/Suspension Socket Size Torque Spec Front Axle Hub Nut 35mm 100 lbs-ft Front Ball Joint Nut (Upper) 21mm 60 lbs-ft Front Ball Joint Nut (Lower) 21mm 60 lbs-ft Front Clevis Bolt (Upper) 21mm 100 lbs-ft Front Clevis Bolt (Lower) 21mm 100 lbs-ft Front Control Arm (Upper) 18mm 80 lbs-ft Front Control Arm (Lower) 19mm & 24mm 120 lbs-ft Front Differential Bearing Cap Bolts --mm 47-67 lbs-ft Front Differential Drain Hole 8mm Allen Wrench 15 lbs-ft Front Differential Fill Hole 3/8" Ratchet 15 lbs-ft Front Differential Pinion Nut --mm 200 lbs-ft Front Differential Ring Gear Bolts --mm 95-105 lbs-ft Front Shock/Strut Mounting Nuts 18mm 80 lbs-ft Front Sway Bar Bushing Mount 18mm 110 lbs-ft Front Sway Bar End Link Bolt (Upper) 15mm 100 lbs-ft Front Sway Bar End Link Nut(Upper) 18mm 100 lbs-ft Front Sway Bar End Link (Lower) 18mm 85 lbs-ft Rear Differential/Suspension Socket Size Torque Spec Rear Ball Joint Bracket Bolts --mm 100 lbs-ft Rear Ball Joint Nut --mm 70 lbs-ft Rear Control Arm (Lower) --mm 120 lbs-ft Rear Control Arm/Tri-Link Bolts (Upper) --mm 74 lbs-ft Rear Differential Bearing Cap Bolts --mm 100 lbs-ft Rear Differential Cover Bolts 13mm 30 lbs-ft Rear Differential Pinion Nut 1-1/8" 210 lbs-ft Rear Differential Ring Gear Bolts --mm 70 lbs-ft Rear Shock Mount Bolt (Lower) 15mm 85 lbs-ft Rear Shock Mount Nut (Lower) 18mm 85 lbs-ft Rear Shock Mount (Upper) 15mm 80 lbs-ft Rear Sway Bar Bolts --mm 73 lbs-ft Rear U-Joint Strap 8mm 13 lbs-ft Transmission/Transfer Case Socket Size Torque Spec Transfer Case Drain/Fill Hole 3/8" Allen 15-25 lbs-ft Transfer Case Skid (OEM) 15mm 25 lbs-ft Transmission Cover Bolts 8mm 8-9 lbs-ft Transmission Skid (OEM) 15mm 45 lbs-ft Other Socket Size Torque Spec Front Tow Hook 15mm 45 lbs-ft Fuel Tank Skid 18mm 65 lbs-ft Lug Nuts 1/2" x 20 RH 85-110 lbs-ft Rear Tow Hook 18mm 65 lbs-ft Trailer Hitch Bolts 18mm 65 lbs-ft Retrieved from "http://en.wikibooks.org/wiki/Jeep_Liberty/Torque_Specs_%26_Socket_Sizes" |
Author: | surfRenegade [ Tue Jun 05, 2012 2:35 pm ] |
Post subject: | Re: Socket Size and Torque Specifications |
Thanks guys! Ive had a clunk in mine over large speed bumps. Going to check all of these to insure torque is acurate |
Author: | jrsavoie [ Thu Jul 03, 2014 1:16 pm ] |
Post subject: | Re: Socket Size and Torque Specifications |
Where can I find a list of torque specs for the Liberty? Looking for torque specs for a 2006 Jeep Liberty CRD 2.8 liter diesel. transfer case cross member bolts, 3 on either end M10x1.5 power steering pump to bracket bolts - 3 little bolts. Power steering pump pulley - 3 little bolts Aluminum wheels lug nuts - 100 ft lbs. This I have not verified anywhere power steering pump / serpentine belt bracket tensioner to block bolts - 3 each. - 35 foot lbs Tensioner to power steering pump / serpentine belt bracket bolt. 43.6672 ft lbs or 47 Nm What is the correct name for the power steering pump / serpentine belt bracket? It is called either or in different parts of the books part number Mopar 05093935AA Is there a place to find all these torque specs AND MORE? Somebody mentioned that there is a European manual online that is much easier and more detailed than than the 3 manual set. I haven't found it yet Thank you much. |
Author: | GordnadoCRD [ Wed Jul 10, 2019 7:12 pm ] |
Post subject: | Re: Socket Size and Torque Specifications |
jrsavoie wrote: Where can I find a list of torque specs for the Liberty? Looking for torque specs for a 2006 Jeep Liberty CRD 2.8 liter diesel. transfer case cross member bolts, 3 on either end M10x1.5 power steering pump to bracket bolts - 3 little bolts. Power steering pump pulley - 3 little bolts Aluminum wheels lug nuts - 100 ft lbs. This I have not verified anywhere power steering pump / serpentine belt bracket tensioner to block bolts - 3 each. - 35 foot lbs Tensioner to power steering pump / serpentine belt bracket bolt. 43.6672 ft lbs or 47 Nm What is the correct name for the power steering pump / serpentine belt bracket? It is called either or in different parts of the books part number Mopar 05093935AA Is there a place to find all these torque specs AND MORE? Somebody mentioned that there is a European manual online that is much easier and more detailed than than the 3 manual set. I haven't found it yet Thank you much. They will be in here. you can download and save to access faster in the future. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |