Corbeau seat brackets work great for the front seats.
Sent from my SM-G973U using Tapatalk
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 3.7V6 power....whats the most you've seen??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=56699 |
Page 1 of 1 |
| Author: | KJ_WHEELER_2010 [ Fri Nov 05, 2010 9:24 am ] |
| Post subject: | 3.7V6 power....whats the most you've seen??? |
I have a question...whats the most hp and trq anyones seen from Jeeps 3.7V-6? Isn't stock hp like 210 and tq like 235? I'd like to bump it up to around 250hp and 330tq. Just wondering what was out there |
|
| Author: | ATXKJ [ Fri Nov 05, 2010 8:48 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
KY - dyno'ed his at 251 at the rear wheel http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=212543#p212543 but I think that was with the Nitrous |
|
| Author: | ridenby [ Fri Nov 05, 2010 9:30 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
Change the axle ratios to 4.10,or go with Marlins steel diff and do 4.88. Make it feel like a nail eater. Either is cheaper,more bang for the buck,I do believe. |
|
| Author: | KJ_WHEELER_2010 [ Sun Nov 07, 2010 10:37 am ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
Re-gear? I like the sound of that for wheeling but at highway speeds my RPMs are high already. At like 75mph I'm running 2,500 RPM.....sounds high to me. Maybe I'm just used to my Camaro & Mustang. |
|
| Author: | MidnightLiberty [ Sun Nov 07, 2010 7:19 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
Or then re-gear and swap in a 6 speed stick or the 545RFE. Kidding. A 4.7L swap is probably a better bet. Just get a later version, 2008 and up IIRC. |
|
| Author: | KJ_WHEELER_2010 [ Sun Nov 07, 2010 8:05 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
Well, when I get back from deployment I'm throwing a lift, 32"tires and an ARB locker in the rear axle. I kinda wanna make it more trail ready (even though so far it's gone some awesome places) but the drag racer in me think about that power side of things lol |
|
| Author: | tjkj2002 [ Sun Nov 07, 2010 8:36 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
KJ_WHEELER_2010 wrote: Well, when I get back from deployment I'm throwing a lift, 32"tires and an ARB locker in the rear axle. I kinda wanna make it more trail ready (even though so far it's gone some awesome places) but the drag racer in me think about that power side of things lol You need to regear then for 32" tires,you will still be sucking with 4.10's and 32" tires(I know,been there done that).For the 3.7 you want your rpm's between 2500-3000rpms at highway speeds,that is the 3.7's "sweet spot" for best power and mpg's. |
|
| Author: | KJ_WHEELER_2010 [ Sun Nov 07, 2010 8:40 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
Yeah I think I will end up doing that. Because I'd like to buy another cheap car to drive and turn my Liberty into a trail buggy.....but I guess thats what we all want huh lol |
|
| Author: | silverkj [ Sat Mar 16, 2013 2:20 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
tjkj2002 wrote: KJ_WHEELER_2010 wrote: Well, when I get back from deployment I'm throwing a lift, 32"tires and an ARB locker in the rear axle. I kinda wanna make it more trail ready (even though so far it's gone some awesome places) but the drag racer in me think about that power side of things lol You need to regear then for 32" tires,you will still be sucking with 4.10's and 32" tires(I know,been there done that).For the 3.7 you want your rpm's between 2500-3000rpms at highway speeds,that is the 3.7's "sweet spot" for best power and mpg's. Crikey I would be driving everywhere at 70-80mph in that rev range 2000 rpm gives me 65mph and 22 mpg |
|
| Author: | tjkj2002 [ Sat Mar 16, 2013 9:34 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
silverkj wrote: tjkj2002 wrote: KJ_WHEELER_2010 wrote: Well, when I get back from deployment I'm throwing a lift, 32"tires and an ARB locker in the rear axle. I kinda wanna make it more trail ready (even though so far it's gone some awesome places) but the drag racer in me think about that power side of things lol You need to regear then for 32" tires,you will still be sucking with 4.10's and 32" tires(I know,been there done that).For the 3.7 you want your rpm's between 2500-3000rpms at highway speeds,that is the 3.7's "sweet spot" for best power and mpg's. Crikey I would be driving everywhere at 70-80mph in that rev range 2000 rpm gives me 65mph and 22 mpg When I was still IFS I was running 2900rpm's doing 78mph and getting just shy off 22mpg's. |
|
| Author: | 02LibertyRacer [ Wed Apr 01, 2020 1:19 pm ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
http://www.airram.com/index.php AirRam has ported heads, forged piston/rod combos from 8.5:1 to 11:1, ATI damper, ARP studs. HP Tuners now covers pre 05 Chrysler ECUs, so laptop tuning is an option. JBA has shorty headers. FlyinRyan has ported TBs. Denso has 12 hole injectors that fit. Performance Distributors has their S.O.S coils. For the trans: Sonnax HP parts and shift kit. With all this stuff available, I don't see why a beast of a Powertech couldn't be built. Think about it, a gutted KJ could weigh 3500. Corbeau makes brackets for the KJ, so better seats. I've got a whole list of other parts to build one hell of a sleeper. |
|
| Author: | KJWildman [ Wed Aug 12, 2020 7:23 am ] |
| Post subject: | Re: 3.7V6 power....whats the most you've seen??? |
Corbeau seat brackets work great for the front seats. Sent from my SM-G973U using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|