Transmission Skid Plate for a 2004 KJ

Country_Rob · **Joined:** Tue Jul 27, 2010 12:07 am **Posts:** 16

Howdy,

Has anyone installed a 05 or later transmission skid plate on a 04 KJ? Does anyone have any pictures of the install or perhaps a step by step how to?

Thanks in Advance!!

Pippobug · **Posted:** Tue May 31, 2011 6:14 am

Hi,

Have a look at these two tipic treads, I installed 05-07 skid plates to my KJ 03, hopefully they might help

viewtopic.php?f=3&t=55852

viewtopic.php?f=3&t=54621

I have more photos if you need.
Fil.

LoveLauren · **Posted:** Tue May 31, 2011 3:51 pm

yes..i have an 04 liberty.. and the skid i bought is for an 05 and didnt fit lol. it was difficult but mopar discontinued the skid for 04 and below..sucks... but ill show u pictures one of the bolts isnt in..theres only 3 bolts holding it on because on my jeep where the other bolt is suppose to go there are no threads!.. so yea... its on my cardomain on the second or 3rd page i believe.

LoveLauren · **Posted:** Tue May 31, 2011 4:05 pm

Country_Rob · **Joined:** Tue Jul 27, 2010 12:07 am **Posts:** 16

Thanks for the reply.

The pictures are of the front skid plate, not the transmission skid plate. The transmission skid plate installs between the front skid plate and the transfer case skid plate. It is long an rectangular, at least judging from the pictures I've seen online. Have you installed this skid plate as well?

Thanks

LoveLauren · **Posted:** Wed Jun 01, 2011 2:06 pm

I never seem to read before i post lol. And i do have it installed dont have pics ..butican gotake one later lol

Country_Rob · **Joined:** Tue Jul 27, 2010 12:07 am **Posts:** 16

Yes Loren,

Pictures would be very much appreciated!!

RK

Pippobug · **Posted:** Thu Jun 02, 2011 3:51 am

Hi Rob,

I think you are looking for this:

This is how the Transmition Skid plate looks New ( minus the Yellow Powder coating):

For extra security and to fix it proparly I added a front plate so that you can bolt it on safely in case you knock it:

This is where you need to drill extra hole to attach to rear crossmember.

Sorry I can't find the photos showing the Transmition Skid attached all the way.
Fil.

Transmission Skid Plate for a 2004 KJ

Who is online