LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Bilstein 5100 Shocks on the Rear Installation Problem http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=77025 |
Page 1 of 1 |
Author: | At The Helm [ Thu Oct 24, 2013 2:13 am ] |
Post subject: | Re: Bilstein 5100 Shocks on the Rear Installation Problem |
Either find the correct sleeves or use 12mm or 1/2" washers to shim the gap. Side note: the shocks hold no weight of your vehicle so the height won't change. The front might have looked higher after installing the shocks because it hadn't settled back in yet. |
Author: | TexasRock [ Mon Nov 04, 2013 10:34 am ] |
Post subject: | Re: Bilstein 5100 Shocks on the Rear Installation Problem |
Agree with AtTheHelm... I used 3 washers on each side to fill the gap or you will get the "clunk" from the shock moving in the shock mounts |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |