LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
Monroe load leveler shocks http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=81646	Page 1 of 1

---

Author:	y2k_TA [ Sat Mar 21, 2015 4:51 pm ]
Post subject:	Monroe load leveler shocks
I have purchased monroe load level shocks for 02 dakota. What is the part that I need to get from JBA to make these fit properly. Is it this? Energy suspension 8107g And do I need a set for top and bottom or just top or bottom.

---

Author:	JeepMorrison [ Sat Mar 21, 2015 5:26 pm ]
Post subject:	Re: Monroe load leveler shocks
All of the ones i have used bolted right in, just tighten them down good becuase they are 1/16" smaller or so. Just add a washer or just bend the mount a hair.

---

Author:	y2k_TA [ Sun Mar 22, 2015 4:51 pm ]
Post subject:	Re: Monroe load leveler shocks
I bought these shocks for 02 Dakota as recommended on this site. I am doing 3.5 econolift except with load level shocks and am concerned that these may not be long enough. The extended length is only 22.75 . Are my concerns warranted or am I just over thinking this.

---

Author:	JeepMorrison [ Sun Mar 22, 2015 6:27 pm ]
Post subject:	Re: Monroe load leveler shocks
Your over thinking it. Tommudd runs them at 4" and i have a set i change out when i drag the camper around. And im also at 4". You will be fine

---

Author:	y2k_TA [ Sun Mar 22, 2015 10:11 pm ]
Post subject:	Re: Monroe load leveler shocks
Ok, they will go in this week then. I have my 948's on hand. Just waiting on 4 upper iso's from JBA to come in. I guess I need to start on my brake line brackets. Thank for the reassurance on the shocks.

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/