It is currently Mon Jan 22, 2018 2:13 am

All times are UTC - 5 hours [ DST ]


Forum rules


Lost Jeeps Official Vendor Posts for CRDs only. Members may also post replies to the vendor posts.



Post new topic Reply to topic  [ 130 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7  Next

Would you commit to a purchase?
Yes 79%  79%  [ 64 ]
No 6%  6%  [ 5 ]
Maybe 15%  15%  [ 12 ]
Total votes : 81
Author Message
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Sat May 02, 2015 8:02 am 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4024
Location: Green Cove Springs FL
Deleted

_________________
Bought my '05 CRD on June 2nd '07, used with 29,000 miles.
intake elbow and EGR delete. 7 volt Etecno glow plugs
Yeti stage 2 ECU tune. Straight pipe exhaust. DIY intercooler hoses
Provent and modified factory 180F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, 255-75-17 tires.
Still love it.


Last edited by flash7210 on Sat May 02, 2015 8:38 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Sat May 02, 2015 4:47 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
Play nice, boys!


Anyway, back on topic: all pre-orders shipped today (check your email for tracking number). Thanks to everyone who pre-ordered!

Image


We now have kits in stock and ready to ship!

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Sat May 02, 2015 7:48 pm 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2236
Location: Cleveland, OH
weeks101 wrote:
Play nice, boys!


Anyway, back on topic: all pre-orders shipped today (check your email for tracking number). Thanks to everyone who pre-ordered!

Image


We now have kits in stock and ready to ship!


Which one is mine? Lol.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 04, 2015 11:08 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
thermorex wrote:
Which one is mine? Lol.

Should be out for delivery today or tomorrow!

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 04, 2015 11:10 am 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2236
Location: Cleveland, OH
weeks101 wrote:
thermorex wrote:
Which one is mine? Lol.

Should be out for delivery today or tomorrow!


I mean from that pile of package, which one is mine? Just joking, I have already an eta for tomorrow. Thanks for shipping so fast!

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 04, 2015 11:43 am 
Offline
LOST Member

Joined: Sun Nov 23, 2014 8:11 am
Posts: 108
Location: Virginia, west of D.C. / In the middle of moving to Roanoke
weeks101 wrote:
thermorex wrote:
Which one is mine? Lol.

Should be out for delivery today or tomorrow!

Just got mine in the mailbox.

Thanks for the loots out the door quickly.

_________________
'06 Liberty Limited CRD.
129,920 miles.
- Timing belt done.
- Weeks Kit Stage 1.
- Weeks Kit Stage 2.
- JBA 2.5 inch Silver kit and UCAs installed at 125K miles.
- Weeks supplied Samco Intercooler Hoses and clamps.


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 04, 2015 10:23 pm 
Offline
LOST Member
User avatar

Joined: Sun Jul 10, 2005 10:30 am
Posts: 264
Location: Bedford, IN
Weeks, I sent you an email from here. I got two extra Stage 2 kits.

_________________
My Jeep Liberty page

ORM, air filter mod, and less restrictive exhaust has increased my 'everyday' driving 3 mpg.


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Tue May 05, 2015 11:06 am 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
Stan Wright wrote:
Weeks, I sent you an email from here. I got two extra Stage 2 kits.
Thanks for getting in touch, Stan. I will have to ask my assistant how they managed to mess that up! :dizzy:

crasher wrote:
Just got mine in the mailbox. Thanks for the loots out the door quickly.

Cheers! Nice sig!

thermorex wrote:
Thanks for shipping so fast!

Thanks for your patronage!

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Tue May 05, 2015 5:30 pm 
Offline
LOST Newbie

Joined: Sat Apr 25, 2015 10:34 am
Posts: 34
Stage 1 and 2 kits arrived. No instructions in the box but I can figure it out. Thanks


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Tue May 05, 2015 5:40 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
Over wrote:
Stage 1 and 2 kits arrived. No instructions in the box but I can figure it out. Thanks

Sent you a link via PM.

There is a slip of paper in each kit, with a link to the instructions.

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Tue May 05, 2015 8:42 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 06, 2007 9:51 pm
Posts: 5796
Location: Somewhere between Heaven and Hell... But it is really hot here on Earth...
Over wrote:
Stage 1 and 2 kits arrived. No instructions in the box but I can figure it out. Thanks


The slips of paper say that you should hire me to do the install for you... ;)

:5SHOTS:


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Thu May 14, 2015 4:13 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
Anyone install yet? Would love to see photos of your "spare parts"

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Sat May 16, 2015 7:32 pm 
Offline
LOST Junkie

Joined: Sun Mar 23, 2008 9:53 pm
Posts: 672
Location: London, England
Just a quick note on weeks' customer service. My kit was sent to me by USPS on 6th May (to England), and I tracked its progress. On Thursday (14th), the tracking showed that it had been delivered, but I had not received it! I emailed Seth the same day about this. He phoned USPS and spent a good hour finding out that when USPS said delivered, they meant to my local Royal Mail facility.

I picked it up Saturday morning (16th) after the postman popped a card through my letterbox advising me that it was available for collection, and the amount of the customs charge.

I am very appreciative and grateful to Seth for taking the trouble that he did to find out what the situation was and for getting back to me so quickly - truly excellent customer service, and an example to other sellers.

I have no connection to Seth other than as a very satisfied customer, and I must stress that this testimonial is wholly unsolicited - just in case anyone is wondering! :)

Adrian

_________________
Light Khaki 2.8CRD: TJM alloy bumper; Skid Row &Asfir skids;ext. breathers; SAMCO hoses; Amsoil air filter;Grabber At2 235/70/16; Fumoto; Euro TC; Odyssey PC1500;GDE FTEcotune; OME lift; lightforce driving lights;RuffStuff diff cover;nylon fan+Hayden2905;ss vortex exhaust; snorkel.


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Sun May 17, 2015 8:32 pm 
Offline
LOST Newbie

Joined: Sun May 03, 2015 2:01 pm
Posts: 3
Being a noob, I've taken my time installing the stage 1 and stage 2 kits. Getting closer to the end, step 26, I'm looking to remove the hose barb on the cylinder head, but it doesn't take 8mm Allen/hex. The hole through the middle of it is just round. Anyone else run into this issue? Edit: the hose barb came out with a deep well 18mm socket. All back together and running much smoother. Thanks Weeks!


Last edited by XJ&KJSports on Mon May 18, 2015 4:03 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 18, 2015 1:59 am 
Offline
LOST Member

Joined: Wed Mar 11, 2015 3:50 pm
Posts: 398
Location: Fairbanks, Alaska
XJ&KJSports wrote:
Being a noob, I've taken my time installing the stage 1 and stage 2 kits. Getting closer to the end, step 26, I'm looking to remove the hose barb on the cylinder head, but it doesn't take 8mm Allen/hex. The hole through the middle of it is just round. Anyone else run into this issue?


Post a pic? I just looked at mine and it's got an allen hex.

_________________
2016 Ram 2500 4x4, 6.7 Cummins, 68RFE, Crew Cab
1995 Dodge Ram 2500 4x4, 5.9 Cummins, 47RH, Reg Cab
2005 Liberty CRD,fixed the rockers and a couple more things,GDE Hot tune,Weeks Stage 1 and 2 EGR delete,Hot Diesel solutions Tstat assembly(wonderful heat!), ARP studs, OME 1.5" lift.....thanks Seth!


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 18, 2015 4:27 am 
Offline
LOST Newbie

Joined: Sun May 03, 2015 2:01 pm
Posts: 3
Post a pic? I just looked at mine and it's got an allen hex.[/quote]

Thanks for chiming in. I was able to get the hose barb out with an 18mm deep well. If I am able to get this picture to post correctly, the hex peg/round hole dilema I had.
[img]https://lh3.googleusercontent.com/-cGv_C8gYWyc/VVmfcA667AI/AAAAAAAABso/aj7ALqC0t8E/s128/EGR%252520Coolant%252520Hose%252520Barb%252520Driver%252520Side%252520Engine.jpg/[img]


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Mon May 18, 2015 1:54 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
Lancer wrote:
Just a quick note on weeks' customer service. My kit was sent to me by USPS on 6th May (to England), and I tracked its progress. On Thursday (14th), the tracking showed that it had been delivered, but I had not received it! I emailed Seth the same day about this. He phoned USPS and spent a good hour finding out that when USPS said delivered, they meant to my local Royal Mail facility.

I picked it up Saturday morning (16th) after the postman popped a card through my letterbox advising me that it was available for collection, and the amount of the customs charge.

I am very appreciative and grateful to Seth for taking the trouble that he did to find out what the situation was and for getting back to me so quickly - truly excellent customer service, and an example to other sellers.

I have no connection to Seth other than as a very satisfied customer, and I must stress that this testimonial is wholly unsolicited - just in case anyone is wondering! :)

Adrian

Thanks Adrian!

XJ&KJSports wrote:
Being a noob, I've taken my time installing the stage 1 and stage 2 kits. Getting closer to the end, step 26, I'm looking to remove the hose barb on the cylinder head, but it doesn't take 8mm Allen/hex. The hole through the middle of it is just round. Anyone else run into this issue? Edit: the hose barb came out with a deep well 18mm socket. All back together and running much smoother. Thanks Weeks!

Interesting, thanks for the heads up.

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Thu May 21, 2015 4:57 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4024
Location: Green Cove Springs FL
Image

_________________
Bought my '05 CRD on June 2nd '07, used with 29,000 miles.
intake elbow and EGR delete. 7 volt Etecno glow plugs
Yeti stage 2 ECU tune. Straight pipe exhaust. DIY intercooler hoses
Provent and modified factory 180F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, 255-75-17 tires.
Still love it.


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Thu May 21, 2015 5:06 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Jul 30, 2012 3:29 pm
Posts: 695
Location: Minnesota
Nice photo! Permission to use that on our web site?

_________________
Supporting Vendor

SasquatchParts.com
VM Motori Parts & Performance​

Jeep Liberty 2.8L CRD
RAM 1500 3.0L EcoDiesel
Jeep Grand Cherokee 3.0L EcoDiesel
Chevy Colorado/GMC Canyon 2.8L Duramax​


Top
 Profile  
 
 Post subject: Re: Machined stainless exhaust manifold plug (Weeks Kit Stag
PostPosted: Thu May 21, 2015 5:53 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4024
Location: Green Cove Springs FL
Go ahead.
No problem.

_________________
Bought my '05 CRD on June 2nd '07, used with 29,000 miles.
intake elbow and EGR delete. 7 volt Etecno glow plugs
Yeti stage 2 ECU tune. Straight pipe exhaust. DIY intercooler hoses
Provent and modified factory 180F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, 255-75-17 tires.
Still love it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 130 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com