So I'm installing the ARB bumper on my 2006 CRD and can't make heads or tail out of the stock fog light part of the instructions. I took one out and can't seem to make it fit in the fog light bezel that came with the bumper. The pigtail connectors that came with the bumper don't fit into the stock connectors and the instructions keep referring to the existing fog lights being either a pre 2013 Toyoda or a 2013 Toyoda. What's Toyoda have to do with a Jeep and bumper for a jeep?

Those of you who have the ARB bumper what is your fog light setup? Let see some pic's of your ARB bumper setups.

_________________
MACHINIST
[muh-shee-nist]

Someone who solves a problem you didn't know you had in a way you don't understand.

See also: Wizard, Magician.

I don't have a clue but I know Mass Hole has an ARB bumper and he checks in fairly regularly but if you don't get a fairly quick response I am sure he wouldn't mind a direct email/PM.

_________________
05 Blu LIM, OME GDE Tbo, wk II 245/75/17, KC Lights, bull bar, 195K H TC
05 Blu Lim, Dayton, GDE HT, 255/75/18 , 210K , H TC
06 Bla Lim, GDE Eco, Destination AT 245/75/17, 151K, H TC
06 D Khaki Lim 126K wkII Eur TC
05 D khaki Lim 145k refurbishing
All CRDS: Fumoto, Lift , Fan Shroud mod, fuel head Gen II, SAMCOS,self TB, 2 Mic filt, Hayden

The good news is you figured out the instructions suck, bad news is the fog light fittings are not for jeeps. Be happy if you can get the fake closeouts installed correctly.

_________________
#1 2006 Silver CRD Limited, flipped spare tire, ASFIR skids, GDE TCM & notune, blue SAMCOs, ETECNO 7V glow plugs, Rotella T6, intank fuel pump, Gen2 fuel head, new crank sensor, JBA 2.5 in silver package, Provent and ARB bumper
#2 2006 Metallic Green Limited; currently DOA...nothing to see here, just move along

I did a write up a couple years ago when I installed mine, it had info concerning this topic.
Search for "ARB install issues" 3 or 4 years ago.

_________________
#1 2006 Silver CRD Limited, flipped spare tire, ASFIR skids, GDE TCM & notune, blue SAMCOs, ETECNO 7V glow plugs, Rotella T6, intank fuel pump, Gen2 fuel head, new crank sensor, JBA 2.5 in silver package, Provent and ARB bumper
#2 2006 Metallic Green Limited; currently DOA...nothing to see here, just move along

What I remember being reported is that the ARB bumper is made to be used specifically with ARB's lights, which are NOT included, but available at significant extra expense. They are NOT made for the Jeep lights to fit.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770