LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Mechanical Fan Hub Rebuilding Services
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=169&t=92028		 Page 1 of 1
Author:  WWDiesel [ Tue Aug 10, 2021 2:15 am ]
Post subject:  Mechanical Fan Hub Rebuilding Services
Mechanical Fan Hub Rebuilding & Exchange Services available.
Rebuilt with new Koyo deep groove sealed high speed bearings.

NOTE: YOUR FAN HUB MUST BE IN A REBUILDABLE CONDITION! SEVERELY DAMAGED HUBS/PULLEYS CANNOT BE REBUILT.

You ship your fan hub to me, I rebuild it, and ship it back to you.
PM me for additional information if interested.

Image
Author:  WWDiesel [ Mon Aug 16, 2021 11:29 am ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
Mechanical Fan Hub Rebuilding Services available for immediate swap.
One day turn-a-round when I receive your worn out rebuildable fan hub.
PM if you need a fan hub.

Image
Author:  WWDiesel [ Sun May 26, 2024 4:59 pm ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
Mechanical Fan Hub Rebuilding Services available with oversize bearings for immediate swap.
Using Quality Koyo deep groove oversize bearings
One to two day turn-a-round once I receive your worn out rebuildable fan hub.
PM if you need a fan hub.

Overboring for new bearings on the Milling Machine

Image

Image
Author:  seafish [ Sun May 26, 2024 8:32 pm ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
How much does this service cost?

Are you buying good condition cores??

Feel free to reply by PM if you prefer.
Author:  WWDiesel [ Sun May 26, 2024 10:43 pm ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
So far all the cores sent to me except a few of them have been rebuildable. So I simply swap them out with one I have in stock already rebuilt and ready to go.
Some fellow LOST members on here were kind enough to send me several cores which got me ahead a little bit and helped when an owners core was damaged so badly that it was not usable for rebuilding. I have small collection of them! :lol:
I will send you the purchase information via email and a private message. :wink:
Author:  Gregnew [ Mon Jul 08, 2024 2:08 am ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
WWDiesel wrote:
So far all the cores sent to me except a few of them have been rebuildable. So I simply swap them out with one I have in stock already rebuilt and ready to go.
Some fellow LOST members on here were kind enough to send me several cores which got me ahead a little bit and helped when an owners core was damaged so badly that it was not usable for rebuilding. I have small collection of them! :lol:
I will send you the purchase information via email and a private message. :wink:

thanks
Author:  Gregnew [ Mon Jul 08, 2024 2:16 am ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
WWDiesel wrote:
Mechanical Fan Hub Rebuilding Services available for immediate swap.
One day turn-a-round when I receive your worn out rebuildable fan hub.
PM if you need a fan hub.

Image

i could really use one
Author:  WWDiesel [ Mon Jul 08, 2024 12:21 pm ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
Gregnew wrote:
WWDiesel wrote:
Mechanical Fan Hub Rebuilding Services available for immediate swap.
One day turn-a-round when I receive your worn out rebuildable fan hub.
PM if you need a fan hub.

i could really use one

Use PM or email buttons at bottom of post to contact me.
Image
LINKS:
-----> PM
-----> EMAIL
thanks,
Author:  WWDiesel [ Mon Jul 08, 2024 11:18 pm ]
Post subject:  Re: Mechanical Fan Hub Rebuilding Services
Mechanical Fan Hub Rebuilding Services still available.
One to two day turn-a-round once I receive your worn out rebuildable fan hub.
Viscous Heater Delete Kits in stock and available.
Use PM or email buttons to contact.

-----> PM
-----> EMAIL
thanks,[/quote]

Image
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/