I could use a transfer skid.... I will need to ck w/Quinn to see if ALL J has gotten any made up
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lift party coming soon http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=21&t=480 |
Page 1 of 1 |
| Author: | skrracing [ Fri Jul 15, 2005 6:01 pm ] |
| Post subject: | Lift party coming soon |
OK guys, I just go off the phone with Quinn and he sadi we could have another lift party...Now really that is very funny seeing they just installed a new lift in the shop... But anyway... I have a couple of new guys that were asking if we could do another lift party. I was thinking maybe Aug/Sept time frame. Anyone have mods that need to be done. Pre-Calico mods...hehehe later...Clint |
|
| Author: | dirtykj [ Fri Jul 15, 2005 6:33 pm ] |
| Post subject: | |
I'll be there to give a hand. I need a boulder bar for my '05 which is not ready yet (hint hint!). Barbecue this time around? |
|
| Author: | hoku5 [ Fri Jul 15, 2005 7:53 pm ] |
| Post subject: | Lift Party |
Clint, Sept. sounds good to me. I'll be there to give you hand. Nolan |
|
| Author: | LuckeyDuckey [ Fri Jul 15, 2005 8:23 pm ] |
| Post subject: | |
ah man, we were thinking of a 2" spacer lift. guess i gotta call quinn and find out more about it. another way for me to spend money.....oh yeah and we're thinking of those diff rings too.....money--flying--away! just a note, we'll be gone sept 14th to 20th for the SDSU-OSU football game (scott's work) and for scott to visit his peeps in OH and, it would be great to have everything done in time for that Rubi run in DV in november. (yes, we're only a sport but we're going to tag along with the rubi's) |
|
| Author: | Edvalencia [ Fri Jul 15, 2005 8:29 pm ] |
| Post subject: | |
Can we do a rear locker? Ed (edit - just saw your response on the other thread Clint. Cool!) |
|
| Author: | Ntrgrl [ Sat Jul 16, 2005 8:13 pm ] |
| Post subject: | need a transfer case skid.... |
I could use a transfer skid.... I will need to ck w/Quinn to see if ALL J has gotten any made up
|
|
| Author: | jpzkj [ Sat Jul 16, 2005 11:40 pm ] |
| Post subject: | |
I'll be there to help out.
|
|
| Author: | 02LIBRT [ Sat Jul 16, 2005 11:51 pm ] |
| Post subject: | |
I am good at getting in the way! 
I can also tell you how NOT to install a PowerTrax. 
In any case, I will be there if needed or to pester Jeff. Later, J |
|
| Author: | CaKJFreedom [ Sun Jul 17, 2005 4:33 pm ] |
| Post subject: | |
If I don't have to be at work, I am so there! |
|
| Author: | KJ Willy [ Sun Jul 17, 2005 7:39 pm ] |
| Post subject: | lift party |
Well I am not going to be able to go on the Calico Turkey run, is this lift party still open if not going? I am not registered with KJ West yet, but going to, need to put the stuff into a envelope and send it. I am in school with the Navy down in San Diego, (IDC School for any Sailors or Marines) and not sure what my schedule is going to be like at that time. But anyways I would be looking to get either the BDS lift kit or go for Rusty's kit, still need to look into it right now, and possibly some boulder bars if money to spare. So if that dates come out and I can squeeze in a weekend off from studying I would like to come up and participate. Will |
|
| Author: | dirtykj [ Mon Jul 18, 2005 2:25 am ] |
| Post subject: | Should I bring along a jack? |
Just bought a jack from Sears, the 3-ton one with long arm and 20" lifting range. Nice, but it's so very heavy it's not funny  Did I go overboard? There are lighter units like Torin aluminum, but that one has 4000lbs maximum load and only lifts about 14.75" --- I had one that lifted 15" (before I exchanged it) and it wasn't enough to lift the front of my KJ completely for tire change. Maybe it was where I placed it (I later jacked it up at the control arm, but didn't think that was a hot idea).
|
|
| Author: | skrracing [ Mon Jul 18, 2005 10:32 am ] |
| Post subject: | Hope this helps Will |
Not a problem Will. You can even join at the lift party if you like. But you do have to be a club member to have done to your jeep at one of the lift parties. So just come on up and join the club and join in on all the fun. Later...Clint |
|
| Author: | skrracing [ Mon Jul 18, 2005 10:33 am ] |
| Post subject: | Big jack |
man some times you just have a jack that is heavy or tall enough. I say the big heavy one will work great for just keeping in the garage. Later...Clint |
|
| Author: | Cinque [ Mon Jul 18, 2005 1:00 pm ] |
| Post subject: | |
I’d like to install a front locker, …but I’m not sure yet, all depends if I can rescheduled some work activities once you pick the date for the Lift Party Ramiro |
|
| Author: | KJ Willy [ Sun Jul 24, 2005 11:42 am ] |
| Post subject: | Dates?? |
So are the dates set yet?? I really want to attend this but I need to make sure I can clear my sched, Also will it be on a Sat?? |
|
| Author: | jpzkj [ Sun Jul 24, 2005 12:03 pm ] |
| Post subject: | |
KJWILLY: The lift parties have all been on Saturday's in the past...It's a good bet that this one will be also. I would expect we'll hear something soon about the date. 
|
|
| Author: | KJ Willy [ Sun Jul 31, 2005 4:58 pm ] |
| Post subject: | |
So is thier any word on when this is going to be? Maybe torwards the end of Sept? ?
Just askin cause I really have to plan this stuff out, I think I am going to call Rusty's tomorrow and order my lift. |
|
| Author: | LuckeyDuckey [ Sat Aug 27, 2005 2:24 pm ] |
| Post subject: | |
hey clint, anymore word on the lift party? i talked to quinn a while back on what i wanted to do and i need to give him a few weeks to get parts beforehand. i have sept 10 and 11 and the 25th and that's about it. |
|
| Author: | KJ Willy [ Sat Sep 17, 2005 12:08 pm ] |
| Post subject: | |
Any word on if and when the lift party will happen?? Just getting anxious to get my rusty's lift put on. thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|