LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Uwharrie April 16-19
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=22&t=41258		 Page 1 of 1
Author:  ohv_kj [ Mon Mar 16, 2009 11:15 pm ]
Post subject:  Uwharrie April 16-19
i know that there is a date for the next week but me and my club will be there then...i haven't met alot of you guys and would like to...if your free come on out...
camping at the back of Daniel trail the west end... CB channel 38...
Author:  JeepinJarhead03 [ Mon Mar 16, 2009 11:30 pm ]
Post subject: 
bah, dangit i already got somethin for the 18th to the 20th :( i knew i shoulda wrote it down when you mentioned it last time
Author:  rescu2000 [ Fri Mar 20, 2009 8:15 pm ]
Post subject: 
I'll try to make it. I'd like to see the ECTR guys again. My Libby should be a little more capable this time. I should have my back bumper done by then (with integrated air tanks). Front bumper is almost complete (got my shackles and hoop left, shackles go on tomorrow). I would also like to get some more tires/rims and my lockers in, but I can go without them if I have to. Seems like I have been talking about lockers for a year, but I really had no need for them until Uwharrie opened back up.
Author:  adanbmx [ Fri Mar 20, 2009 9:31 pm ]
Post subject: 
darn cant make this one either, gonna be in utah for a while. after utah and b4 i deploy i need to make atleast one kj trip
Author:  rescu2000 [ Sun Mar 22, 2009 10:01 pm ]
Post subject: 
OK. I'm officially in for the 16th through the 19th (Probably won't show up until that Friday though)

My lockers have been ordered and are on the way. I'll have them installed by then.
Front bumper is done. Except paint, but it is primered, which is OK.
Winch is mounted. Has wire cable on it. I'm buying synthetic. Hopefully it'll get here by then. If not, I'm fine with wire.

All that's left to do to the Libby is the rear bumper and an SFA. With 35's of course.

I'll be taking a 6X10 trailer if anyone needs me to haul anything from Rocky Mount, NC to make room in their rig.
Author:  uvalax236 [ Mon Mar 23, 2009 1:02 am ]
Post subject: 
Jeep Jamboree in Nelson County that weekend, so that's where I will be! :lol:
Author:  ohv_kj [ Mon Mar 23, 2009 9:59 am ]
Post subject: 
uvalax236 wrote:
Jeep Jamboree in Nelson County that weekend, so that's where I will be! :lol:


jeep jambo is to much money...
Author:  uvalax236 [ Mon Mar 23, 2009 12:13 pm ]
Post subject: 
ohv_kj wrote:
uvalax236 wrote:
Jeep Jamboree in Nelson County that weekend, so that's where I will be! :lol:


jeep jambo is to much money...



Not when its a birthday present :wink:
Author:  rescu2000 [ Mon Mar 23, 2009 8:21 pm ]
Post subject: 
Quote:
jeep jambo is to much money...


Says the guy who spent $8000 on a front axle swap :)
Author:  Redwolf698 [ Tue Mar 24, 2009 8:40 pm ]
Post subject: 
nooo remember he did it with a D30, it cost like a box of tinfoil and some chewing gum right?
Author:  ohv_kj [ Tue Mar 24, 2009 9:28 pm ]
Post subject: 
lol...well to let the cat out of the bag...by the end of the summer i will be getting ready to swap axles (dana 44 front and and full width 9 inch or 60...not sure on that...so that means the axles under the jeep now will be for sale :wink: :wink: ...

that's awesome rescue...i'll tell john and jake, they were asking about you....look on to our local forum...get on there and introduce yourselves...it's on my signature...
Author:  adanbmx [ Wed Mar 25, 2009 9:56 pm ]
Post subject: 
woohoo no utah, i may be bale to go, ohv_kj ill call ya this weekend
Author:  rescu2000 [ Thu Mar 26, 2009 8:18 pm ]
Post subject: 
My Aussie Locker is here. TrueTrac is on the way. I should have both installed by next weekend at the latest. That should make me a little more capable than last time. I would like to have a little more ground clearance though. I've lost some with the extra weight of the bumper, winch, skid row skid, and rock rails. I found myself draging in places I had not previously had problems last time and that was just with the rock rails and Super Skid.

I see a SFA in my future, but I'd like to wait until the RL kit releases and I can do it myself. I'm not a fan of paying $3,000 for labor :roll:
Author:  rescu2000 [ Tue Mar 31, 2009 3:11 pm ]
Post subject: 
Update: Aussie is installed, rear bumper is 90% complete (it is mounted and functional, just not prettied up)., and DTT is sitting on my workbench in a box. I'll get it in this weekend.
Author:  LoganSix [ Thu Apr 02, 2009 8:17 am ]
Post subject: 
Sounds like it's going to be a great setup.
Author:  rescu2000 [ Thu Apr 09, 2009 9:41 pm ]
Post subject: 
Got the Jeep back together. Looks like there is a good chance of rain next weekend though. That's gonna suck for the camping. May make the trails more fun though.
Author:  ohv_kj [ Sun Apr 12, 2009 10:07 am ]
Post subject: 
well... i know me and rescue are going so if you are there see you then...only 4 more days until i leave...oh to let you all know...i'm bringing the feature editor ali, from Peterson's to do some pics...if you all get the mag you would have notice that cape fear 4x4 is the place where i work and we have some cool new trucks in the mag...

oh i thought if i name drop it would get some more of you guys up there...lol
Author:  rescu2000 [ Sun Apr 19, 2009 8:37 pm ]
Post subject: 
Just got back from Uwharrie. Had a blast, but I got a little body damage (from being clumsy), popped a bead, and broke a CV Axle. I pulled the axle and headed home, but got two good days in.

The body damage came from dropping my spare on the side of the jeep taking it off the roof. Two little dents.

Broke the CV axle at the bottom of Daniel.

I did go up Kodiak Rock though. The right-hand side of it. (no... not the bypass, LOL)
Author:  LoganSix [ Tue Apr 21, 2009 7:47 am ]
Post subject: 
Glad you had fun.


Currently, I can't open the engine hood. Apparently the release cable doesn't have enough tension or something. *sigh*
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/