Im also down if its on a weekend and i dont have any wedding crap to do. I want to put 2 ISOs in the rear to leave the KJ out. If you need a place to wrench mine may be available.
Whos bringing the peanut butter and jelly?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| We need another lift party on LI http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=23&t=54706 |
Page 1 of 2 |
| Author: | Jeepin_it_real [ Wed Aug 04, 2010 12:30 am ] |
| Post subject: | We need another lift party on LI |
Its just gotta happen... i walked into my garage again today and saw all those sad parts just sitting in the box. the next two weeks will be tough for me, but definitely after that! whos in... let's get some heads... figure out a place and time etc and get the wheels rollin' |
|
| Author: | LI_KJ [ Wed Aug 04, 2010 10:24 am ] |
| Post subject: | Re: We need another lift party on LI |
My job ends in two weeks so I should be available for some wrenching. I don't have a spot to do it, but I have some knowhow and a bunch of sockets and tools. Count me in. I still have a rear end to take care of as well. |
|
| Author: | VMKJCRD [ Wed Aug 04, 2010 4:55 pm ] |
| Post subject: | Re: We need another lift party on LI |
Im also down if its on a weekend and i dont have any wedding crap to do. I want to put 2 ISOs in the rear to leave the KJ out. If you need a place to wrench mine may be available. Whos bringing the peanut butter and jelly?
|
|
| Author: | Jeepin_it_real [ Wed Aug 04, 2010 7:29 pm ] |
| Post subject: | Re: We need another lift party on LI |
lol im up for it any time... just not the 14th.... i got basically all the tools except the ball joint remover which i am getting... let me know when your all available |
|
| Author: | infernicus [ Wed Aug 04, 2010 8:20 pm ] |
| Post subject: | Re: We need another lift party on LI |
LI_KJ wrote: ..I still have a rear end to take care of as well. Ditto. VMKJCRD wrote: Im also down if its on a weekend and i dont have any wedding crap to do. I want to put 2 ISOs in the rear to level the KJ out. Ditto. Jeepin_it_real wrote: ...except the ball joint remover which i am getting... I don't know if you need it.. I know for the KJ's you don't, some people don't even recommend it. |
|
| Author: | luigi1285 [ Wed Aug 04, 2010 10:01 pm ] |
| Post subject: | Re: We need another lift party on LI |
na no need for ball joint remover |
|
| Author: | LI_KJ [ Wed Aug 04, 2010 10:13 pm ] |
| Post subject: | Re: We need another lift party on LI |
If you are replacing the factory arms with JBAs the balljoints are already in place. Just remove the arm and bolt new one in place. Does the KK's pockets have to be clearanced like they do on the KJs? |
|
| Author: | Jeep Dawg [ Thu Aug 05, 2010 9:41 am ] |
| Post subject: | Re: We need another lift party on LI |
luigi1285 wrote: na no need for ball joint remover NOPE. they just fall off all by it's self!!!! Factory ball joints = 
|
|
| Author: | luigi1285 [ Thu Aug 05, 2010 12:28 pm ] |
| Post subject: | Re: We need another lift party on LI |
i believe you still have to make the pockets |
|
| Author: | Vranes17 [ Thu Aug 05, 2010 5:11 pm ] |
| Post subject: | Re: We need another lift party on LI |
Im down to come join if Im available, found myself a nice jack so we wont break any this time haha. Gotta get this right knuckle issue fixed first. |
|
| Author: | VMKJCRD [ Thu Aug 05, 2010 5:13 pm ] |
| Post subject: | Re: We need another lift party on LI |
Don't let the guy who broke the jack and 2 drill bits go... |
|
| Author: | Vranes17 [ Thu Aug 05, 2010 5:26 pm ] |
| Post subject: | Re: We need another lift party on LI |
VMKJCRD wrote: Don't let the guy who broke the jack and 2 drill bits go... 
|
|
| Author: | infernicus [ Thu Aug 05, 2010 5:43 pm ] |
| Post subject: | Re: We need another lift party on LI |
HAH, driiiiiiillll niiiiiiiice aaaaaand sloooooowwwww. My bit is still good, and I wasn't going to let anyone else break it, haha. So, When I lifted my Jeep, my friends jack broke, and when we lifted yours, another broke, apparently these Jeeps like to break jacks. |
|
| Author: | Vranes17 [ Thu Aug 05, 2010 6:28 pm ] |
| Post subject: | Re: We need another lift party on LI |
Dean did you ever try the barcode trick? |
|
| Author: | infernicus [ Thu Aug 05, 2010 6:30 pm ] |
| Post subject: | Re: We need another lift party on LI |
I tested the copy of the barcode and it worked, but never went to buy it. |
|
| Author: | Jeepin_it_real [ Thu Aug 05, 2010 11:48 pm ] |
| Post subject: | Re: We need another lift party on LI |
you guys are breakign 3 ton jacks? |
|
| Author: | infernicus [ Fri Aug 06, 2010 12:01 am ] |
| Post subject: | Re: We need another lift party on LI |
Nah, pretty sure they were two-ton. |
|
| Author: | Vranes17 [ Fri Aug 06, 2010 12:17 am ] |
| Post subject: | Re: We need another lift party on LI |
yeah no, it wasnt a 3, it was def a 1-2ton plus the head was smaller than usual on the jack |
|
| Author: | LI_KJ [ Fri Aug 06, 2010 8:22 am ] |
| Post subject: | Re: We need another lift party on LI |
Vranes17 wrote: yeah no, it wasnt a 3, it was def a 1-2ton plus the head was smaller than usual on the jack I think it was a Fisher Price 'My first Jack'!
|
|
| Author: | Jeepin_it_real [ Fri Aug 06, 2010 4:47 pm ] |
| Post subject: | Re: We need another lift party on LI |
i was gunna say cause if you guys managed to bust up 3 ton jacks maybe i'll do my lift myself
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|