I have a driveway if you're willing to drive out to Rochester
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Might need some assistance http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=23&t=64147 |
Page 1 of 1 |
| Author: | JeepJunky33 [ Wed Dec 14, 2011 12:09 pm ] |
| Post subject: | Might need some assistance |
So Yesterday I ordered my Jet performance stage 2 chip and 180deg thermostat. I live in an apartment and park on the street. Anyone want to volunteer there driveway for me to install the thermosts (gonna be a pain in the booty). 12pack on me. |
|
| Author: | LI_KJ [ Wed Dec 14, 2011 2:42 pm ] |
| Post subject: | Re: Might need some assistance |
JeepJunky33 wrote: So Yesterday I ordered my Jet performance stage 2 chip and 180deg thermostat. I live in an apartment and park on the street. Anyone want to volunteer there driveway for me to install the thermosts (gonna be a pain in the booty). 12pack on me. Seth. I feel ya with the no driveway space issue. I don't have one for use, but would like to see what all is involved with thermostat install. Might have to do that real soon as well...I think Peter VMJKJCRD has done one before as well on his CRD. Hope someone can volunteer a driveway... |
|
| Author: | remdawg [ Wed Dec 14, 2011 7:07 pm ] |
| Post subject: | Might need some assistance |
I have a driveway if you're willing to drive out to Rochester
|
|
| Author: | VMKJCRD [ Wed Dec 14, 2011 7:41 pm ] |
| Post subject: | Re: Might need some assistance |
Ha the kj gasser is a walk in the park compared to the kj crd stat replacement. I had to remove my air box(top and bottom), both turbo hoses,had to move some wires around, disconnect 4 or 5 hoses going to the stat housing, and the 3 screws... Yea those were real fun.. Specially the part where I had to use my wife's skinny fingers with a magnet taped to it to get the one last screw out... She was like: you want me to put my finger where and do want?  oh and the gasket, scrapping it off the block was fun! I swear the engineers must have been midgets.  I would offer my driveway if I was home but this Saturday I'm going house hunting with the wife (with driveways!) and Sunday I have a birthday party to go to. Sorry guys, just been really busy  If you do get a chance to do it make sure when you refill the coolent run the heat a full blast to purge the air out of the system for 5 or so minutes. |
|
| Author: | JeepJunky33 [ Thu Dec 15, 2011 4:23 pm ] |
| Post subject: | Re: Might need some assistance |
hey guys thanks for the offers. i just got off the phone with jet and they said there is no need to change the t-stat so im going to just do the chip and attempt to save a headache. thanks though |
|
| Author: | LI_KJ [ Fri Dec 16, 2011 12:46 am ] |
| Post subject: | Re: Might need some assistance |
JeepJunky33 wrote: hey guys thanks for the offers. i just got off the phone with jet and they said there is no need to change the t-stat so im going to just do the chip and attempt to save a headache. thanks though COPY that! Saw your post with TKJ, let us know if you see noticeable gains with the Chip installed.! |
|
| Author: | JeepJunky33 [ Fri Dec 16, 2011 1:53 pm ] |
| Post subject: | Re: Might need some assistance |
LI_KJ wrote: JeepJunky33 wrote: hey guys thanks for the offers. i just got off the phone with jet and they said there is no need to change the t-stat so im going to just do the chip and attempt to save a headache. thanks though COPY that! Saw your post with TKJ, let us know if you see noticeable gains with the Chip installed.! Will do. I called JEt adn they were telling me how thats not true. The perameters that change are not perameters taht the computer "learns" The guy called it flat ignorance. TKJ is a smart guy with a nice rig but he and I always seem to but heads on opinions. It makes for good discussion. It make it fun cause I respect the guy. I will let you know how the install goes, I am going to attempt to make an install and start up video. Well see if that happens. You and I will have to meet up and race to see if it works since we have just about the same setup at this point. |
|
| Author: | Jeepin_it_real [ Mon Dec 19, 2011 5:06 pm ] |
| Post subject: | Re: Might need some assistance |
i have a jet chip installed... piece of cake, lemme know if you have questions |
|
| Author: | JeepJunky33 [ Tue Dec 20, 2011 11:25 am ] |
| Post subject: | Re: Might need some assistance |
So before I left the office I installed the chip. Your right john, super easy. You feel it in the downshifts and higher rpm range. I dig it! |
|
| Author: | VMKJCRD [ Tue Dec 20, 2011 1:32 pm ] |
| Post subject: | Re: Might need some assistance |
JeepJunky33 wrote: So before I left the office I installed the chip. Your right john, super easy. You feel it in the downshifts and higher rpm range. I dig it! Wanna race ?your v 6 against my 4 banger. 
|
|
| Author: | JeepJunky33 [ Tue Dec 20, 2011 4:01 pm ] |
| Post subject: | Re: Might need some assistance |
VMKJCRD wrote: JeepJunky33 wrote: So before I left the office I installed the chip. Your right john, super easy. You feel it in the downshifts and higher rpm range. I dig it! Wanna race ?your v 6 against my 4 banger. Challenge Accepted! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|