LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Diff gaurd (update2)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=25&t=6519		 Page 1 of 2
Author:  the1jferg [ Thu Mar 09, 2006 12:00 am ]
Post subject:  Diff gaurd (update2)
Yall think this is worth a dern??

http://purplecranium.com/wsm/i-15_dana_ ... guard.html
Author:  Edwin [ Thu Mar 09, 2006 12:37 am ]
Post subject: 
Looks stout, you reckon? 1/2" thick flange! :shock:
Author:  the1jferg [ Thu Mar 09, 2006 9:30 am ]
Post subject: 
$70 plus shipping worth????


I can zip-tie a bent garbage can lid around the diff a lot cheaper. Its perty though. :?
Author:  Edwin [ Fri Mar 10, 2006 8:47 am ]
Post subject: 
I did'nt look at the price.
Author:  PitViper [ Sat Mar 11, 2006 11:26 pm ]
Post subject: 
Just make sure it fits over the front lip of the cover.... unless you drive backwards all the time :lol:
Author:  the1jferg [ Sat Mar 11, 2006 11:50 pm ]
Post subject: 
"unless you drive backwards all the time "

Funny you say that man, Since I have a 4x2, you would be suprised what backward has gotten me through.


It don't have to really worry because the steel flange makes it where it won't peel away. I hope it does have that lip though.

I might just get an extra cover, cheaper
Author:  Edwin [ Sun Mar 12, 2006 1:23 pm ]
Post subject: 
the1jferg wrote:
"
I might just get an extra cover, cheaper


Yea but it would be a PITA to repair on the trail.
Author:  the1jferg [ Fri Mar 31, 2006 6:50 pm ]
Post subject: 
spider is orderd

Fuel Tank skid next
Author:  the1jferg [ Mon Apr 10, 2006 7:02 pm ]
Post subject: 
I like saying this while I'm drinking: :lol: :lol: :lol:

"Dana 35 Half Spider Differential Rock Guard from Purple Cranium Products"

I'll post the pics when I get it on this evening.
Author:  the1jferg [ Mon Apr 10, 2006 7:49 pm ]
Post subject: 
This is Bullcrap !!!!!!! :twisted: :twisted: :evil: :evil: :evil:

The SOB don't Fit ???? What kinda axle do I have?????? or did they send the wrong part.

FRICKIN FRACK !!!!!!!!!!!!!!!!!!!!!!!!!!
Author:  Neal [ Mon Apr 10, 2006 8:03 pm ]
Post subject: 
should be able to make it fit.........just takes some cutting, grinding, welding and drill some new holes
not a big deal
Author:  jason thompson [ Mon Apr 10, 2006 8:08 pm ]
Post subject: 
the1jferg wrote:

What kinda axle do I have?????? or did they send the wrong part.





as per rieder racing's 2005 catolog you have a Chrystler 8 3/8" or 8 1/4" (they are the same)
they do not list a Dana 35 as being in a KJ but they have been wrong befor
Author:  the1jferg [ Mon Apr 10, 2006 8:09 pm ]
Post subject: 
I'm moving this for the benny of anyone with a Liberty dana 35.

As thick as this thing is, darn right its a big deal.
Author:  jason thompson [ Mon Apr 10, 2006 8:11 pm ]
Post subject: 
if you post up the numbers on the diff tag including spaces i can read it for you
i am refering to the tag that was held on by 1 or 2 diff cover bolts
Author:  the1jferg [ Mon Apr 10, 2006 8:26 pm ]
Post subject: 
Jason, They ain't wrong, but they ain't right either. Mine is a Dana 35, 27 spline, non c clip, bolt in, that I know like the back of my hand. It was what the liberty was supposed to have before they switched to 8.25 corp
Author:  jason thompson [ Mon Apr 10, 2006 8:26 pm ]
Post subject: 
jason thompson wrote:
if you post up the numbers on the diff tag including spaces i can read it for you
i am refering to the tag that was held on by 1 or 2 diff cover bolts



i was wrong just looked a the KJ and the only tag is a ratio tag it has only three number ie 3 73 or 3 55 obvious ratios
the chrystler axels dont have a diff tag like the dana axles but i could tell from a good pic that much i know for sure
Author:  the1jferg [ Mon Apr 10, 2006 8:26 pm ]
Post subject: 
I'll get you the tag number though so you'll know its mine for sure if you wanna blow it up :lol: .
Author:  jason thompson [ Mon Apr 10, 2006 8:29 pm ]
Post subject: 
the1jferg wrote:
I'll get you the tag number though so you'll know its mine for sure if you wanna blow it up :lol: .


i dont want to blow up any thing
im just trying to help a brotha out
Author:  the1jferg [ Mon Apr 10, 2006 8:32 pm ]
Post subject: 
The DANA Tag # is

52111774AF

3 73 6770

Looks almost like a 8.25 cover with the Dana diamond stamped in...I'm looking into this theory. No, its a dana 35 with a diff bolt pattern. #$$%&&%

I had a smiley
Author:  the1jferg [ Mon Apr 10, 2006 8:41 pm ]
Post subject: 
Here you go Jason, Interesting reading.

http://dana.mediaroom.com/index.php/press_releases/1736

"Dana will supply a
portion of the rear axles for the Jeep Liberty, with the remainder to be
manufactured by DaimlerChrysler."

Pic here:

http://www.thefergusons.us/kj/dana352.jpg
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/