zip ties..
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Dune flag holder http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=26&t=42152 |
Page 1 of 1 |
| Author: | SilverLakeKJ [ Sat Apr 11, 2009 5:31 pm ] |
| Post subject: | Dune flag holder |
What does everyone use to mount there duneflag? |
|
| Author: | 03CDKJ [ Sat Apr 11, 2009 6:01 pm ] |
| Post subject: | |
zip ties..
|
|
| Author: | SilverLakeKJ [ Sun Apr 12, 2009 7:55 am ] |
| Post subject: | |
Here at Silverlake they want the flag mounted to the front right now i have a temporary mount bolted to the clevice hole in my recovery point but looking for a better option |
|
| Author: | KJ kyle [ Sun Apr 12, 2009 12:48 pm ] |
| Post subject: | |
a friend of mine bought a CJ5, and the previous owner put a quick release from an airline on his front bumper, then the male fitting on the flag. pretty cool little set up if you ask me. |
|
| Author: | KJ kyle [ Sun Apr 12, 2009 12:53 pm ] |
| Post subject: | |
also, if it is something your going to use often (id imagine you would silverlakekj) there is this. http://www.sandwizard.net/ |
|
| Author: | MP Jeeper [ Mon Apr 13, 2009 12:07 am ] |
| Post subject: | |
cdiekhans wrote: zip ties..
x2 
|
|
| Author: | jeepkj02 [ Mon Apr 13, 2009 9:19 am ] |
| Post subject: | |
SilverLakeKJ wrote: Here at Silverlake they want the flag mounted to the front right now i have a temporary mount bolted to the clevice hole in my recovery point but looking for a better option
Can a dune flag be zip tied to the radio antenna?? Where can you buy dune flags from? |
|
| Author: | ihatemybike [ Mon Apr 13, 2009 1:26 pm ] |
| Post subject: | |
On Eugene originally we were going to use a bicycle safety flag. The axle mount that comes with it came be mounted under one of the lugs holding the spare tire holder to the door. Remove spare Loosen one of the upper lugs holding the mount to the door Slide flag holder on Tighten lug Bend holder upright Mount spare Install flag in holder when needed |
|
| Author: | jerbacher [ Mon Apr 13, 2009 1:28 pm ] |
| Post subject: | |
ihatemybike wrote: On Eugene originally we were going to use a bicycle safety flag. The axle mount that comes with it came be mounted under one of the lugs holding the spare tire holder to the door.
Remove spare Loosen one of the upper lugs holding the mount to the door Slide flag holder on Tighten lug Bend holder upright Mount spare Install flag in holder when needed Thats what I did on mine too, but as was stated before, Silver Lake requires front mount.... |
|
| Author: | Sean [ Tue Apr 21, 2009 9:34 pm ] |
| Post subject: | Re: Dune flag holder |
SilverLakeKJ wrote: What does everyone use to mount there duneflag?
I used a combination of L-brackets mounted to where my tow hooks are under the front bumper... I don't think I have any pictures, but I'll look around Bad quality, but you get the point... 
|
|
| Author: | LostRenegade [ Sat Apr 25, 2009 4:02 pm ] |
| Post subject: | |
I have a front hitch. I had a piece of metal welded onto a tow hook for my flag. There are many shops around Silver lake that sell flags. They are about $20 for the flag. some will sell mounting hardware. |
|
| Author: | KJ kyle [ Wed May 06, 2009 10:24 pm ] |
| Post subject: | |
can anyone who has been to silver lake tell me if they sell a "rip rod" style flag? apperently its just a 3/8" fiberglass rod. anyways i just finished my flag mount... and thats the style i need. Ill have pics tomorrow, my friend barrowed my camera and gave me his cell phone charger instead of my camera cord. 
|
|
| Author: | SilverLakeKJ [ Thu May 07, 2009 6:12 pm ] |
| Post subject: | |
the flags availible in silverlake all have a 1/2 metal stud on the bottom and are a tapered fiberglass pole |
|
| Author: | tommudd [ Thu May 07, 2009 6:19 pm ] |
| Post subject: | |
an ARB bumper would work real well 
|
|
| Author: | KJ kyle [ Thu May 07, 2009 6:37 pm ] |
| Post subject: | |
does the flag need to be 10ft tall, or 10ft from the ground? |
|
| Author: | jeepkj02 [ Thu May 14, 2009 12:01 pm ] |
| Post subject: | |
KJ kyle wrote: does the flag need to be 10ft tall, or 10ft from the ground?
It has to be 10 foot tall, mounted on the front bumper. Where does everyone get the flag from?? |
|
| Author: | SilverLakeKJ [ Fri May 15, 2009 10:01 pm ] |
| Post subject: | |
everywhere up here in the silverlake area has them including all the gas stations will try to post pics of my mount tommorow |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|