| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| May I borrow your 17mm hex socket in Colorado Springs? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=27&t=66148 |
Page 1 of 1 |
| Author: | silence [ Sun Apr 01, 2012 12:03 pm ] |
| Post subject: | May I borrow your 17mm hex socket in Colorado Springs? |
Anybody in the Springs be willing to let me borrow a 17mm hex socket so I can change my alternator pulley? I will include a couple beers for your generosity. Thanks. |
|
| Author: | woodtick [ Sun Apr 01, 2012 6:13 pm ] |
| Post subject: | Re: May I borrow your 17mm hex socket in Colorado Springs? |
silence wrote: Anybody in the Springs be willing to let me borrow a 17mm hex socket so I can change my alternator pulley? I will include a couple beers for your generosity. Thanks. What I did was buy a 17mm allen wrench and cut off about 2" with a grinder slid it into a 17mm 1/2" drive socket on an electric impact wrench. Allen wrench cost me about $8. You can owe me the beer. Hacker-Pschorr Wiess. 
|
|
| Author: | silence [ Tue Apr 10, 2012 6:01 pm ] |
| Post subject: | Re: May I borrow your 17mm hex socket in Colorado Springs? |
Nobody!? Ok I guess more beer for me, I'll just go buy one. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|