| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| looking for some skid plates near delaware http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=28&t=13831 |
Page 1 of 1 |
| Author: | chrisroth1 [ Thu Oct 26, 2006 1:45 pm ] |
| Post subject: | looking for some skid plates near delaware |
I am thinking about going on the trail run in November, however I would like to get some skid plates before then. I live near wilmington and was hoping someone had some for sale so I could pick them up. I am in college so I am on a limited budget so stockers will work good for me. Otherwise I will try to order them from JParts for 216. Thanks |
|
| Author: | priell3 [ Thu Oct 26, 2006 2:11 pm ] |
| Post subject: | |
What skid plates do you need? Doesn't your Renegade already have some factory installed? |
|
| Author: | chrisroth1 [ Thu Oct 26, 2006 2:42 pm ] |
| Post subject: | |
i need all of the plates i don't have any. My renegade did not come with them, i think it was part of a more expensive option package. I did get the rock rails factory though. |
|
| Author: | priell3 [ Thu Oct 26, 2006 3:22 pm ] |
| Post subject: | |
Jparts will probably be the best deal you find in all likelyhood. I hope you get them so you can join us on the 19th. |
|
| Author: | uvalax236 [ Thu Oct 26, 2006 3:56 pm ] |
| Post subject: | |
I have a stock engine skid. PM me with an offer. It has a dent in it but nothing a good smack with a hammer couldent fix. |
|
| Author: | Joe Jeeper [ Thu Oct 26, 2006 9:39 pm ] |
| Post subject: | Skid Plates |
Mopar skids are the least expensive and do a fine job, I have all 4. If you use your dealer make sure he gives you 10% off. Joe |
|
| Author: | chrisroth1 [ Thu Oct 26, 2006 9:47 pm ] |
| Post subject: | |
whats the 10% off for? my dealer usullay charges 10% over normal prices. Anyway, I ended up just buying them from Jparts. They where cheap enough to just buy new ones. |
|
| Author: | jelohead [ Sat Oct 28, 2006 8:10 pm ] |
| Post subject: | |
i bought the 3 front skids from my dealer for $150 engine, tranny, and xfer case |
|
| Author: | W3CSX [ Sun Oct 29, 2006 1:33 am ] |
| Post subject: | |
Cool looks like everyone will be ready for the trip on the 19th. Chris what did you end up doing about the CB antenna? |
|
| Author: | chrisroth1 [ Sun Oct 29, 2006 10:13 am ] |
| Post subject: | |
I ended up picking up a window mount antenna that didn't needed grounded so I didn't have to worry about making a bracket and putting holes in anything. I had a neighbor with an SWR tuner and it came in between 1 and 1 1/2. So i think its alright now |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|