LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Crd timing belt change best place? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=29&t=78918 |
Page 1 of 1 |
Author: | 4wheeldeal [ Tue Apr 22, 2014 5:56 pm ] |
Post subject: | Crd timing belt change best place? |
So coming close to timing belt time on my Libby diesel any suggestions on where to talk it besides dealer? What sort of cost am I looking at too? I'm out side of Kingston but will drive if price and tech is good. |
Author: | 4wheeldeal [ Sun Jun 22, 2014 1:37 pm ] |
Post subject: | Re: Crd timing belt change best place? |
Normal, no one in Ontario replies...brutal.... Anyways might sell it, dealer said $1500 F that... Parts are $400 online |
Author: | DieselFarmer [ Sat Jun 28, 2014 2:35 pm ] |
Post subject: | Re: Crd timing belt change best place? |
Just saw this ad http://www.kijiji.ca/v-cars-trucks/kitc ... nFlag=true, maybe give him call. |
Author: | 4wheeldeal [ Sun Aug 17, 2014 9:16 pm ] |
Post subject: | Re: Crd timing belt change best place? |
Going to the dealer... or sealer... bought parts off ID so saved a bit. |
Author: | Ritchie [ Fri Sep 26, 2014 9:00 am ] |
Post subject: | Re: Crd timing belt change best place? |
I used the stealership the first time Very expensive. I have a mechanic that is going to do a head gasket and the timing belt Just having an issue rounding up the vm 1085 I should have bought this tool a few years back when it was 200 bucks Now over 700 Am in Grimsby Ontario. Am also looking at the possibility of renting it from green diesel. |
Author: | mecne [ Tue Nov 18, 2014 12:33 am ] |
Post subject: | Re: Crd timing belt change best place? |
Ritchie wrote: I used the stealership the first time Very expensive. I have a mechanic that is going to do a head gasket and the timing belt Just having an issue rounding up the vm 1085 I should have bought this tool a few years back when it was 200 bucks Now over 700 Am in Grimsby Ontario. Am also looking at the possibility of renting it from green diesel. Hey Ritchie , Have you had your timing belt and head gasket done yet? I just did Head gasket , rockers and Timing belt on my CRD and have all the tools needed. Drop me a PM , maybe we could work something out. Mike |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |