Thank you for your reply. So I went to the store and got an e14 torx socket but no matter what I tried was not able to get those bolts off the unit bearing. I am scared to continue trying to remove them as I do not want them to be stripped.
Please see attached image I cant get the part indicated by the red arrow off of the hub to then pull the knuckle off without taking out the e14 unit bearing screws. And I cant pull the whole assembly out because the part indicated in blue stops the axle (green) from coming out.
I guess my question is if its possible to do the ball joints without removing those bolts how do you do it. Im sort of desperate at this point but not desperate enough to pay this bozo at the shop $600 bucks to do it (YET).