It is currently Fri Mar 29, 2024 2:13 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Rear control arm questions
PostPosted: Thu Mar 26, 2020 12:30 pm 
Offline
LOST Member
User avatar

Joined: Sun Jun 15, 2014 3:07 pm
Posts: 197
Location: Athens, Ohio
Hey yall
Just got in my wwdiesel mount for the iro arm, arm is en route and should arrive next week. Im seeing if anyone knows the size and thread of the body side upper control arm bolts. Mine are decently rusty, and want to replace them when i install the new arm. I know i can take them to the parts store with me and measure, but once they are out i do not have a second vehicle to take me there.
Thanks in advance!


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)


Top
 Profile  
 
 Post subject: Re: Rear control arm questions
PostPosted: Thu Mar 26, 2020 2:57 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7158
Location: Central GA
andrew.wenmoth wrote:
Hey yall
Just got in my wwdiesel mount for the iro arm, arm is en route and should arrive next week. Im seeing if anyone knows the size and thread of the body side upper control arm bolts. Mine are decently rusty, and want to replace them when i install the new arm. I know i can take them to the parts store with me and measure, but once they are out i do not have a second vehicle to take me there.
Thanks in advance!

Easy:
Metric Bolt
Mounting, Upper. Hex Flange Head. M12x1.75x117. (Grade 10.9)
This Fits Your 2005 Jeep Liberty LIMITED EDITION 2.8L Turbo 4 Cyl Diesel A/T 4X4
Part Number: 06504748

You may have to purchase a slightly longer one and cut it off. :juggle:
https://www.boltdepot.com/Product-Detai ... oduct=6779

Dorman:
Part Number: 460-697 (box of 10)

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Rear control arm questions
PostPosted: Fri Apr 03, 2020 5:58 pm 
Offline
LOST Member
User avatar

Joined: Sun Jun 15, 2014 3:07 pm
Posts: 197
Location: Athens, Ohio
Thanks ww! Ended up ordering the above, and you dont need to cut any off! Above the “nut” in the body is a bit of empty space, and seeing as how these are only 3mm too long, by the time you add a washer at the head theres only a mm or two hanging out the nut side and theres plenty of room. Thanks for you help above and with getting the arm back in!


Sent from my iPhone using Tapatalk

_________________
06 KJ sport 926/948s Mopar/Boiler Skids, trimmed front bumper with detours backbone, (in possession of or soon: custom RL Super skink sliders (tommudd) and JBA upper Arms)


Top
 Profile  
 
 Post subject: Re: Rear control arm questions
PostPosted: Fri Apr 03, 2020 11:05 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7158
Location: Central GA
andrew.wenmoth wrote:
Thanks ww! Ended up ordering the above, and you dont need to cut any off! Above the “nut” in the body is a bit of empty space, and seeing as how these are only 3mm too long, by the time you add a washer at the head theres only a mm or two hanging out the nut side and theres plenty of room. Thanks for you help above and with getting the arm back in!

Thanks for the info, that's good to know going forward.
Enjoy your new HD IronRock rear upper control arm, the last one you will ever have to purchase... :BANANA:

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com