What is a good choice of ABS malfunction code reader. I see a quick list of the following which are in my price range of $150 or less... Any other suggestions?

CGSULIT SC530 Chrysler/ Jeep/ Dodge OBD2 Scanner Diagnostics Bi-directional Scan Tool
THINKCAR OBD2 Scanner, ABS/SRS/ECM/TCM System Car OBDⅡ Diagnostic Scan Tool, 94+ Vehicle Brands Car Code Reader, AutoAuth for FCA SGW
2024 LAUNCH X431 CRP123 Elite OBD2 Diagnostic Scanner ABS SRS Fault Code Reader

Dean.

_________________
2005 Jeep Liberty 2.8L CRD 248
Kona, Hawaii (Big Island) USA

Changed Turbo.
100,000-mile service.
Replaced harmonic balancer.
Noise in front axle or 3rd member - removed loose chain in transfer case.
Rebuilt engine - replaced #3 cylinder, piston, valves, head repair. Removed EGR.
Sheared bolts on TC. Replaced flex plate, TC, bolts.

I'm back everyone! I'm told a software glitch was preventing me from posting. Thanks for the fix !!!

Attempted to purchase a new ABS sensor cable for the right front wheel. It has a square body to the sensor but the new part arrived with a round body. Anybody have experience in finding the correct square body sensor? Do I need to change my front knuckle to accept a rouind body sensor?


Both types of front ABS sensors. Square body for right wheel. (Round body is new part)


Front suspension with red arrow at knuckle


ABS sensor cables

Dean.

_________________
2005 Jeep Liberty 2.8L CRD 248
Kona, Hawaii (Big Island) USA

Changed Turbo.
100,000-mile service.
Replaced harmonic balancer.
Noise in front axle or 3rd member - removed loose chain in transfer case.
Rebuilt engine - replaced #3 cylinder, piston, valves, head repair. Removed EGR.
Sheared bolts on TC. Replaced flex plate, TC, bolts.

Probably a silly question but will the round one fit in the hole?

_________________
Australian KJ CRD 2006

It only goes in as far as the o-ring, the hole is square into the remainder of the depth. I do wonder if I could drill it out to accept the round one.

It's not too bad of a problem, I never get into a situation whereas one wheel skids. On the island I never get over 45 mph.

Dean.

_________________
2005 Jeep Liberty 2.8L CRD 248
Kona, Hawaii (Big Island) USA

Changed Turbo.
100,000-mile service.
Replaced harmonic balancer.
Noise in front axle or 3rd member - removed loose chain in transfer case.
Rebuilt engine - replaced #3 cylinder, piston, valves, head repair. Removed EGR.
Sheared bolts on TC. Replaced flex plate, TC, bolts.

The right front pictured on Amazon clearly shows a SQUARE shaped sensor. I would order the correct sensor and NOT drill out the hole to fit the wrong sensor.
Right Front OEM PN: 52128694AE or 52128694AF
https://www.amazon.com/BOXI-Passenger-C ... B09G6M93DH

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Thanks WWDiesel,

I ordered that ABS sensor from Amazon, I'll let you know what it looks like when it arrives.

Dean.

_________________
2005 Jeep Liberty 2.8L CRD 248
Kona, Hawaii (Big Island) USA

Changed Turbo.
100,000-mile service.
Replaced harmonic balancer.
Noise in front axle or 3rd member - removed loose chain in transfer case.
Rebuilt engine - replaced #3 cylinder, piston, valves, head repair. Removed EGR.
Sheared bolts on TC. Replaced flex plate, TC, bolts.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve