Hard to find noise -- clinking and clanking

CaptainDean · **Joined:** Thu Oct 05, 2017 2:22 am **Posts:** 715

CaptainDean wrote:

Is there a way to disable the entire AntiSkid brake system? I'd like to disconnect and toss the entire AntiSkid module.
Maybe I only have to remove the two AntiSkid lamps on the dash panel? Then make two brake lines to bypass the module.
Dean.

What is a good choice of ABS malfunction code reader. I see a quick list of the following which are in my price range of $150 or less... Any other suggestions?

Dean.

CaptainDean · **Joined:** Thu Oct 05, 2017 2:22 am **Posts:** 715

I'm back everyone! I'm told a software glitch was preventing me from posting. Thanks for the fix !!!

Attempted to purchase a new ABS sensor cable for the right front wheel. It has a square body to the sensor but the new part arrived with a round body. Anybody have experience in finding the correct square body sensor? Do I need to change my front knuckle to accept a rouind body sensor?

Both types of front ABS sensors. Square body for right wheel. (Round body is new part)

Front suspension with red arrow at knuckle

ABS sensor cables

Dean.

layback40 · **Posted:** Mon Dec 09, 2024 10:08 pm

Probably a silly question but will the round one fit in the hole?

CaptainDean · **Joined:** Thu Oct 05, 2017 2:22 am **Posts:** 715

layback40 wrote:

Probably a silly question but will the round one fit in the hole?

It only goes in as far as the o-ring, the hole is square into the remainder of the depth. I do wonder if I could drill it out to accept the round one.

It's not too bad of a problem, I never get into a situation whereas one wheel skids. On the island I never get over 45 mph.

Dean.

WWDiesel · **Posted:** Tue Dec 10, 2024 1:40 pm

The right front pictured on Amazon clearly shows a SQUARE shaped sensor. I would order the correct sensor and NOT drill out the hole to fit the wrong sensor.
Right Front OEM PN: 52128694AE or 52128694AF
https://www.amazon.com/BOXI-Passenger-C ... B09G6M93DH

CaptainDean · **Joined:** Thu Oct 05, 2017 2:22 am **Posts:** 715

Thanks WWDiesel,

I ordered that ABS sensor from Amazon, I'll let you know what it looks like when it arrives.

Dean.

WWDiesel · **Posted:** Tue Dec 10, 2024 9:53 pm

CaptainDean wrote:

Thanks WWDiesel,
I ordered that ABS sensor from Amazon, I'll let you know what it looks like when it arrives.
Dean.

CaptainDean · **Joined:** Thu Oct 05, 2017 2:22 am **Posts:** 715

Received the new AntiLock Brake cable yesterday and it looks like the right part. Yeah! :BANANA:

I'll put it in next week after I finish a couple yard and house chores.

A friend is probably going to give me a 1991 Jeep Wrangler YJ Renegade. Needs a clutch and a little TLC. Any of you guys recommend a Jeep YJ forum ?

Dean.

CaptainDean · **Joined:** Thu Oct 05, 2017 2:22 am **Posts:** 715

CaptainDean wrote:

I'm back everyone! I'm told a software glitch was preventing me from posting. Thanks for the fix !!!

Attempted to purchase a new ABS sensor cable for the right front wheel. It has a square body to the sensor but the new part arrived with a round body. Anybody have experience in finding the correct square body sensor? Do I need to change my front knuckle to accept a rouind body sensor?

Both types of front ABS sensors. Square body for right wheel. (Round body is new part)

Front suspension with red arrow at knuckle

ABS sensor cables

Dean.

Attempted to install the new ABS cable to the passenger side front wheel. The cable is the wrong part !! :banghead:

I actually need the cable with the round end on it after all.

I don't understand how this happened. Last year I needed a CAT scan of my head and it proves there is a brain inside my head.

Thanks for the help WWDiesel for finding what I thought was the right part. Sorry I wasted your time and effort. I'll search Amazon and find the right part this time. I'm simply flabergasted. :oops:

Dean.

WWDiesel · **Posted:** Mon Jan 13, 2025 11:28 pm

If you need further assistance, just let me know. :wink:

More than happy to help! :rockon:

Most of the ABS sensors I see listed online have the square end.

52128694AA Right Front ABS Sensor

Hard to find noise -- clinking and clanking

Who is online