4" or 6"

Guest · **Posted:** Mon Mar 16, 2009 1:17 am

Inc wrote:

icarl wrote:

idk why the measurements are so different but i can tell you there is no shortage of lift in the front. It was the rear that i had to add 3 isos to, to try and clear the tires. Are you measuring from the center of the hub or from the bottom of the hub to the bottom of the flare?

Center hub to bottom of flare directly above the hub. Maybe they accidentally gave you Medium springs for the rear.

i don't think so because there was a little tag on it that said ome 948.

Inc · **Posted:** Mon Mar 16, 2009 1:19 am

This really has me wondering what is going on. Do you have any more pics of it?

Diggerfreek · **Posted:** Mon Mar 16, 2009 1:21 am

maybe they put the wrong sticker on the spring

Guest · **Posted:** Mon Mar 16, 2009 1:23 am

Well, if i got the jba 4" in the rear and i stayed at the same height i would still be ahead because i could add isos if needed. Right now i'm all iso'ed out. :lol:

Guest · **Posted:** Mon Mar 16, 2009 1:29 am

Inc wrote:

This really has me wondering what is going on. Do you have any more pics of it?

You mean a pic of me holding a tape measure. :lol:

Maybe, i can get some close ups tommorow.

Inc · **Posted:** Mon Mar 16, 2009 1:31 am

icarl wrote:

Inc wrote:

This really has me wondering what is going on. Do you have any more pics of it?

You mean a pic of me holding a tape measure. :lol:

Maybe, i can get some close ups tommorow.

I just want to see a pic of your rear springs in general, maybe a side shot of the tire's stance in the wheel well on flat ground. No tape measure required. :wink:

JeepinJarhead03 · **Posted:** Mon Mar 16, 2009 1:31 am

i think theres a couple guys around here who could tell you what springs they were with a pic of them even installed, get the pics and hopefully you guys can figure out whats goin on

Guest · **Posted:** Mon Mar 16, 2009 4:08 pm

Here is some pictures.

front

rear

close up rear shows very little clearance to front of rear fender area.

Guest · **Posted:** Mon Mar 16, 2009 8:12 pm

Here's another picture showing before i put any iso's on. You can see how low the rear is compared to the front.

tjkj2002 · **Posted:** Mon Mar 16, 2009 8:20 pm

I think you got taken,no way are those OME 948's in the rear.The pic below is scouts KJ with the Frankinlift,we only added one extra rear isolator with his OME 948's and he is running 265/75 KM2's.

Guest · **Posted:** Mon Mar 16, 2009 9:03 pm

So you think all j's sold me the wrong springs? I should add that the pic above was taken just after i installed the 32" tires and about 9 months after i installed the lift, so do you think the springs could have just sagged after that time?

Guest · **Posted:** Mon Mar 16, 2009 9:11 pm

Here is what it looked like after the original install about a year ago with the 225/75R16 tires. Even then you can see the rear is a lot lower than the front.

Inc · **Posted:** Mon Mar 16, 2009 10:36 pm

icarl wrote:

Here's another picture showing before i put any iso's on. You can see how low the rear is compared to the front.

That ain't normal.

Guest · **Posted:** Mon Mar 16, 2009 11:45 pm

Well, i think i might replace the rear with the jba 4" lift components. I like his customer service and he stands by his products.

Inc · **Posted:** Mon Mar 16, 2009 11:50 pm

icarl wrote:

Well, i think i might replace the rear with the jba 4" lift components. I like his customer service and he stands by his products.

Did you call All J's?

broncsrule · **Posted:** Mon Mar 16, 2009 11:52 pm

I've never seen a Frankenlift ride that low in the back either.

2006 KJ · **Posted:** Mon Mar 16, 2009 11:59 pm

Inc wrote:

icarl wrote:

Well, i think i might replace the rear with the jba 4" lift components. I like his customer service and he stands by his products.

Did you call All J's?

x2

the rear for a frankenlift should sit WAY higher than that.. here is mine with one extra rear isolator.. 2 years after my lift and 16,000 miles on it (with 265/75/16's)

Guest · **Posted:** Tue Mar 17, 2009 12:10 am

Well, it's been a year since i bought it so it's unlikely i would get an exchange.

Inc · **Posted:** Tue Mar 17, 2009 12:11 am

icarl wrote:

Well, it's been a year since i bought it so it's unlikely i would get an exchange.

I'd call just to see what they say at east before I spent any more money. Couldn't hurt. Send them a link to this thread.

superj · **Posted:** Tue Mar 17, 2009 8:10 am

darn you guys and all these pics of lifted libertys. i cannot wait to do mine

mock me all day by posting pics of lifted jeeps in all your posts, why don't you :lol:

4" or 6"

Who is online