LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Looking for a picture of how the ARB winch bumper mounts
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=11544		 Page 1 of 1
Author:  swyszomirski [ Sat Aug 19, 2006 2:08 am ]
Post subject:  Looking for a picture of how the ARB winch bumper mounts
If anyone has a picture of how the ARB winch bumper mounts to the frame, I would like to see it.
Please let me know if you can help.

Stephen
Author:  tommudd [ Sat Aug 19, 2006 7:57 am ]
Post subject: 
I have the directions with pictures on my computer at work if you PM me your email I can send them to you Monday Morning. Or you could pm ARB seth on here and he would send you the directions also. I can tell you that it mounts where the tow hooks mount with one extra bolt on each side, plus you have to drill 2 holes per side in the, I suppose you would call it the lower radiator support brace ? It ends up good and strong for sure
Author:  BJ'naKJ [ Sat Aug 19, 2006 2:39 pm ]
Post subject: 
tommudd wrote:
I can tell you that it mounts where the tow hooks mount with one extra bolt on each side, plus you have to drill 2 holes per side


Two bolts four holes?

I just installed a front receiver hitch and drilled the extra hole on each side. I'm now thinking about an arb and I wonder if the new hole lines up with the bumper?
That would suck if it's off and I had to drill a new one. :cry:
Author:  uvalax236 [ Sun Aug 20, 2006 1:17 am ]
Post subject: 
The ARB mounting plate calls for the 4 stock holes for the tow hooks, then another hole on each side of unibody behind the tow hook holes. It then calls for 2 bolts on each side on the front of the subframe (4 bolts on the front, 6 on the bottom).
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/