| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| hex holes??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=1182 |
Page 1 of 1 |
| Author: | jeepers [ Tue Aug 16, 2005 1:49 pm ] |
| Post subject: | hex holes??? |
i was looking under my kj and saw the hex holes in the frame.  are they there for the skid paltes? if so where can i get the parts? iam planing on fabing my own skids,and rock rails and would like to know, to make things a little easer. 
Thanks, jeepers |
|
| Author: | hoss75 [ Tue Aug 16, 2005 9:36 pm ] |
| Post subject: | |
Yes they are for mounting the transmission skid and the TCase skid. This is the part number for the bolts:6506027AA and this is for the nutzerts: 6506644AA BTW, when I installed my TCase skid I had alot of trouble with the nutzerts.. they didn't want to tighten up much without rounding out the frame holes.. when I ordered my tranny skid with the above hardware, I figured out why.. my TCase skid arrived with the wrong nutzerts.. the ones above worked MUCH better. I actually ordered another set to replace the ones on my TCase skid. P.S.. Troy, you might want to add these parts numbers to your website.. (great site btw!) |
|
| Author: | jeepers [ Wed Aug 17, 2005 12:57 pm ] |
| Post subject: | thanks |
thanks where is the best place to get the the dealer or would napa or autozone care something like that? |
|
| Author: | Troysterr [ Wed Aug 17, 2005 10:33 pm ] |
| Post subject: | |
hoss75 wrote: P.S.. Troy, you might want to add these parts numbers to your website.. (great site btw!)
Will do, great info, thanks! |
|
| Author: | hoss75 [ Wed Aug 17, 2005 11:02 pm ] |
| Post subject: | Re: thanks |
jeepers wrote: thanks where is the best place to get the the dealer or would napa or autozone care something like that?
Well those part numbers won't mean anything to anyone but a dealer, but you might be able to find similar items at a autozone type place. They're pretty cheap though even from the dealer so that's probably the best option. |
|
| Author: | acbafam [ Thu Aug 18, 2005 8:45 pm ] |
| Post subject: | "M-Bolt" |
Does anyone know the part number for this item?, it is for after factory tow hooks... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|