| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Daystar Swaybar Bushings http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=1338 |
Page 1 of 1 |
| Author: | lilmatty [ Mon Aug 22, 2005 6:45 pm ] |
| Post subject: | Daystar Swaybar Bushings |
I've gotten a set of swaybar bushings (actually 2 sets--long story) and find that they don't fit the KJ. They're too tight or so it seems. Basically I must hammer the cap plate down onto the bushing in order to get it on. I mean really beat it hard. Then once that's in place the bushing assembly won't even budge to swivel. I expect it should be able to move a little. I've measured the hole--the one the bar goes though--and the Daystar is about 1/8" smaller that the stock. That might be just that the stock is worn, I don't know. I've been in contact with Daystar but they say that it meets specs. In fact they sent me a second set to try and they fit just the same. Has anybody gone through this process yet and can advise? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|