| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear coil spring questions http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=13793 |
Page 1 of 1 |
| Author: | pokey555 [ Wed Oct 25, 2006 12:25 pm ] |
| Post subject: | Rear coil spring questions |
I need a little help. What is the length, id and spring rate of the a stock kj rear coil spring? A note to the moderators the search function could be improved. Rob |
|
| Author: | the1jferg [ Wed Oct 25, 2006 5:42 pm ] |
| Post subject: | |
I only know that the 02 prelow springs are 2" longer than the newer models on the ground side by side. newer springs provide little over 1/2" less ride height when installed. |
|
| Author: | Skyjump136 [ Wed Oct 25, 2006 5:47 pm ] |
| Post subject: | Re: Rear coil spring questions |
pokey555 wrote: I need a little help. What is the length, id and spring rate of the a stock kj rear coil spring? A note to the moderators the search function could be improved.
Rob Duly noted...please post that in the suggestions forum along with you're criteria for a more "ideal" search feature. We'd need to get a site admin involved in an upgrade like that. BTW, it is a huge improvement over the search feature we had on the previous site! |
|
| Author: | pokey555 [ Fri Oct 27, 2006 12:23 pm ] |
| Post subject: | |
The ride height difference does not help much. I would like to obtain the uncompressed spring lenght and spring rate, without resorting to removing my springs. Does someone have a stock spring laying around that they could measure the lenght for me? Skyjump, A think this site has better search function and also there is a post preview function: http://www.corner-carvers.com/ |
|
| Author: | priell3 [ Fri Oct 27, 2006 12:31 pm ] |
| Post subject: | |
pokey555 wrote: The ride height difference does not help much. I would like to obtain the uncompressed spring lenght and spring rate, without resorting to removing my springs. Does someone have a stock spring laying around that they could measure the lenght for me?
Skyjump, A think this site has better search function and also there is a post preview function: http://www.corner-carvers.com/ I have stock rear springs from my '03 in my shed. I'll measure the height later today. By the way, the springs are for sale. |
|
| Author: | priell3 [ Sun Oct 29, 2006 3:43 pm ] |
| Post subject: | |
Rear springs are 11" in height. |
|
| Author: | pokey555 [ Sun Oct 29, 2006 10:15 pm ] |
| Post subject: | |
thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|