| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| a crd 2.5 daystar question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=14572 |
Page 1 of 1 |
| Author: | sempe02 [ Wed Nov 15, 2006 9:52 pm ] |
| Post subject: | a crd 2.5 daystar question |
i was wondering is there any way i could add an inch to the rear. the lift was supposed to be 2.5 all around and my rear sits an inch lower. could i buy a 0ne inch spacer to go with my current spacer any help would be appreciated |
|
| Author: | Ugg [ Wed Nov 15, 2006 10:09 pm ] |
| Post subject: | |
Most folks who bought the Daystar lift for the CRD (including myself) bought the 1.5 for the front and the 2.5 for the rear. The reason for this is the stiffer springs in the CRD's front. I myself wouldn't put another spacer in the rear, I would change the spacer in the front. |
|
| Author: | TDI4BY [ Wed Nov 15, 2006 11:02 pm ] |
| Post subject: | |
look at my car domain, If you leave the factory lower spacer in the rear it sits level. I have the full 2.5 kit. |
|
| Author: | sempe02 [ Thu Nov 16, 2006 11:26 am ] |
| Post subject: | |
okay cool what did you do about the bump stop |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|