LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Pre-Runner Style Bumper - Take Two.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=15198		 Page 1 of 3
Author:  orm [ Mon Dec 04, 2006 3:13 am ]
Post subject:  Pre-Runner Style Bumper - Take Two.
Ok. Here is the prototype for my second gen. bumper. I tried to address all of the comments on my previous version. bare with me on the night photos. I will have better ones posted in the next few days. Also, the bumper is un-finished (not powdercoated) so, let's not get hung up on that issue. They WILL be shiped powdercoated. So here it goes..........

1. extended ends to match the fender flares
2. added additional tubes, mid span
3. clevis mounts (only one shown)
4. aluminum skid plate. integraded into bumper mounts. no need to drill or weld
5. not shown is the 16 gage plate to fill in the horizontal space between the upper and lower
tubes. I am still waiting on the dimple die set to arrive.
6. 2" reciever for portable winch


Image

Image

Image

Image
Author:  OzLtd [ Mon Dec 04, 2006 4:54 am ]
Post subject: 
WOW !! :shock: 8)

That does look good for a Pre Runner style bar. You've captured the true look of pre runner to suit the KJ's face.

Well done. Cant wait to see daylight finished photos.

Nice one mate.

Regards
Stu

mmm, thinking out aloud here, anyone want a new TJM front bar cheap ? lol!! I want pre runner now :( !! :oops:
Author:  elephantrider [ Mon Dec 04, 2006 8:52 am ]
Post subject: 
i'll take the tjm bar off your hands.!! :shock:
Author:  CarNutCertifies [ Mon Dec 04, 2006 11:16 am ]
Post subject: 
I like this design better, That thing looks great cant wait to see finished product!
Author:  06BlueLimited [ Mon Dec 04, 2006 12:17 pm ]
Post subject: 
Me too, I can't wait!
Author:  Jeger [ Mon Dec 04, 2006 12:22 pm ]
Post subject: 
Lookin good, I think I could go for that. The whole stinger bar thing is throwing me off a bit, but I think it is growing on me. Are you going to offer one without the top bar? Would like to keep the bottom skid etc though.
Author:  HyperKJ [ Mon Dec 04, 2006 1:00 pm ]
Post subject: 
looks awesome,, ill be ordering one as well when there ready :D 8)
Author:  SavageUrge [ Mon Dec 04, 2006 1:42 pm ]
Post subject: 
Is that air-bag compatible?



:-)r :-)r :-)r :wink:
Author:  Jeger [ Mon Dec 04, 2006 2:17 pm ]
Post subject: 
SavageUrge wrote:
Is that air-bag compatible?



:-)r :-)r :-)r :wink:


yes
Author:  raceinfan [ Mon Dec 04, 2006 5:00 pm ]
Post subject: 
awesome just awesome :D will they fit the 04's ???? & realy the only prob. I can see with the 04's is where to mount the side marker/turn signal lights other than that it should fit correct
Author:  2006KJSPORT4x4 [ Mon Dec 04, 2006 7:22 pm ]
Post subject: 
Hey orm...you still going to include those light tabs as on your previous design?
Author:  jtjones [ Mon Dec 04, 2006 8:47 pm ]
Post subject: 
Well I've been reading this board for a while now but have yet to post anything, but after seeing that bumper, I have to! That is a SCHWEET bumper. But I do have to chime in wiht raceinfan, will those of us that have older model Liberty's be able to use them without much modification?
Author:  Tokyojoe [ Mon Dec 04, 2006 9:02 pm ]
Post subject: 
Thumbs up! Looking forward to seeing bigger pics during the day.
Author:  Endurance [ Mon Dec 04, 2006 11:03 pm ]
Post subject: 
i defenitely wanted to buy one too, but it still looks kinda naked to me. Dont get me wrong, it looks awesome, but my KJ is stock and I dont know if something that rough would look good on it. But I wait for some daylight pics and different angle, see how it looks like. I still want to buy one though!

edit:
Quote:
5. not shown is the 16 gage plate to fill in the horizontal space between the upper and lower
tubes. I am still waiting on the dimple die set to arrive.


Well, this might address my concern. I guess that would cover up the gap. Awesome!
Author:  Gris [ Mon Dec 04, 2006 11:13 pm ]
Post subject: 
assuming the price wasn't at the ARB levels I'd definately be interested in one
Author:  kolesy [ Tue Dec 05, 2006 1:01 am ]
Post subject: 
THAT"S IT!!!!!!! HOW FRICKIN MUCH!!!!!!! AND WHERE DO I PAY!!!!!!!!


seriously! AWESOME job ORM, and I am dead serious about ordering off you!!!! LET US ALLL KNOW!!!!!
Author:  OzLtd [ Tue Dec 05, 2006 6:57 am ]
Post subject: 
orm, only suggesting this as constructive but,

I'd like to see ine placed on the front of a regular bonnet (front end) KJ not the flat bonnet one, as the regular one slopes down more between the headlights and the look isnt as tall.

Also, side wings need to be angled up a bit more imo. I LOVE the side on profile, cant fault it, like I said, you've captured the true look of pre runner style.
A small hoop version would look good too......

Keep up the top work mate :)!!

Stu.
Author:  Sport [ Tue Dec 05, 2006 10:45 am ]
Post subject: 
wow orm, good job! Better shots will really tell the tale, but I would love to get my hands on one of those!

Someone mentioned light tabs...I am also curious about that. Wouldn't be a big deal to add them I am sure.
Author:  orm [ Tue Dec 05, 2006 12:48 pm ]
Post subject: 
Jeger & Oz,

Typicaly, the purpose or the "stinger" bar is to protect whatever you have mounted to the top tube. In this case, lights and/or a winch. Basicly it will act as a brush guard. It might even deflect deer... :shock:

There will ABSOLYTLY be light tabs. What good is a aftermarket bumper if you can't put aftermarket lighting on it? :wink:

More photos soon...
Author:  Jeger [ Tue Dec 05, 2006 12:57 pm ]
Post subject: 
Deflecting deer, thats what I need for sure, although I hope I wont be the one to test it :shock:

We are ready for more pics NOW. And some are ready to send you money I believe.
Page 1 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/