Have you tried taking the light bar back off fuse F23 and see if they work? have you checked the fuse?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Light Bar Issue http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=15232 |
Page 1 of 1 |
| Author: | Jeep4me99 [ Tue Dec 05, 2006 10:54 am ] |
| Post subject: | Light Bar Issue |
I installed the renegade light bar on my 2003 sport this weekend. It works great, but now my driver side front and rear marker lamps don't work....The unit plugs into fuse F23, which on a 2003 is the fuse for.....take a guess....driver side front and rear marker lamps. So why does the light bar work, but not the marker lamps????? Any suggestions on this??? I'm stumped! |
|
| Author: | Jeepjeepster [ Tue Dec 05, 2006 1:37 pm ] |
| Post subject: | |
Have you tried taking the light bar back off fuse F23 and see if they work? have you checked the fuse?
|
|
| Author: | Jeep4me99 [ Tue Dec 05, 2006 4:06 pm ] |
| Post subject: | |
Jeepjeepster wrote: Have you tried taking the light bar back off fuse F23 and see if they work? have you checked the fuse?
Ahhh, you led me down the right path. The original fuses go in with the fuses in the kit creating a double fuse setup. Its right in the picture directions, I overlooked it  . thanks for the help.
Another question maybe you can help with. Do you think it will cause an overload with the fuses if I splice in my Cepek 130w lights to the light bar wiring harness? This way when i hit the light bar switch they all come on. |
|
| Author: | Jeepjeepster [ Tue Dec 05, 2006 4:38 pm ] |
| Post subject: | |
Jeep4me99 wrote: Jeepjeepster wrote: Have you tried taking the light bar back off fuse F23 and see if they work? have you checked the fuse? Ahhh, you led me down the right path. The original fuses go in with the fuses in the kit creating a double fuse setup. Its right in the picture directions, I overlooked it . thanks for the help.Another question maybe you can help with. Do you think it will cause an overload with the fuses if I splice in my Cepek 130w lights to the light bar wiring harness? This way when i hit the light bar switch they all come on. I probably wouldnt do that.. I believe the lights on the roof are 55watts a piece.. 55x4=220watts+130watts=350watts/13.5v=25.9Amps.. Thats a decent amount for one circut.. You could easily wire a relay up to rooflights..
|
|
| Author: | JMLoughrey [ Tue Dec 05, 2006 5:20 pm ] |
| Post subject: | |
relays and inline fuses are your friends when dealing with lighting. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|