| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rusty's installed and question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=16790 |
Page 1 of 1 |
| Author: | letigre87 [ Mon Jan 22, 2007 2:47 am ] |
| Post subject: | rusty's installed and question |
Finally got my rustys coil lift on, this thing is truely awesome. between that and removing the rear sway bar its like a whole new beast. quick question though, all the pics and searching I've seen rusty's rear shocks came with poly bushings, mine came with rubber? Wont this shorten the lifespan even more? |
|
| Author: | USPLibby [ Mon Jan 22, 2007 6:21 am ] |
| Post subject: | |
I think that shock will wear out before the bushings do no matter what they are made of. Rubber bushings are softer less road vibrations, Poly bushings are harder and usually gives you more feel of the road. |
|
| Author: | letigre87 [ Tue Jan 23, 2007 12:57 am ] |
| Post subject: | |
thank you for the reply, I was more thinking about this post http://www.lostjeeps.com/forum/phpBB3/vie ... sc&start=0 and my quick assumption said if he can crush poly bushings then I'm screwed. learning has occured, thanks |
|
| Author: | USPLibby [ Tue Jan 23, 2007 5:34 am ] |
| Post subject: | |
That is my pic, and it's not the poly bushing that is crushed it is the steel sleeve insert that gets crushed. When compared to the stock or Rancho shock sleeve Rusty's has a larger interior diameter and thinner construction = crushed when you torque it down to 80 ft lbs. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|