Subject line not long enough
Ok i am installing some rock rails this weekend, My question is
what sort of material shoiuld the bolts i use be
Stainless, Cad plated should i use metal and rubber washers as well
help an Aussie out guys
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Installing rock rails what material should i use http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=1720 |
Page 1 of 1 |
| Author: | Fouros [ Thu Sep 08, 2005 8:24 pm ] |
| Post subject: | Installing rock rails what material should i use |
Subject line not long enough
Ok i am installing some rock rails this weekend, My question is what sort of material shoiuld the bolts i use be Stainless, Cad plated should i use metal and rubber washers as well help an Aussie out guys |
|
| Author: | spoonplugger1 [ Thu Sep 08, 2005 8:38 pm ] |
| Post subject: | |
Stainless bolts aren't strong enough and they are brittle, grade 5 are tougher. I'd use grade 8 or better bolts. The minimum grade recommended for any automotive use is grade 5. Count the notches on top and add two for the grade bolt you have in your hand. |
|
| Author: | jpzkj [ Fri Sep 09, 2005 12:33 am ] |
| Post subject: | |
Grade 8 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|