Increased angle of departure....got it.
I'd hate to have had to learn that lesson the hard way!
Thx
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tire On Top? Tire On the Back? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=1774 |
Page 1 of 1 |
| Author: | SethX9 [ Sat Sep 10, 2005 9:45 am ] |
| Post subject: | Tire On Top? Tire On the Back? |
Didn't want to hijack the "Steel Wheels Painted Black?" thread but I had to ask .... Clint - What was behind your decision to put your spare on the roof? My initial thought would be that it would add to the top-heaviness. |
|
| Author: | skrracing [ Sat Sep 10, 2005 10:33 am ] |
| Post subject: | Hope this helps |
A lot of the places we wheel are at a very sharp angle. Whe you come off the ledge it would hit the spare tire on the rear and bend the door. Hope that helps. later...Clint |
|
| Author: | Calvin56 [ Sat Sep 10, 2005 11:20 am ] |
| Post subject: | |
You attached a Jerry can to the back in place of the tire, right? What kind of adapter/holder did you use? |
|
| Author: | lilmatty [ Sat Sep 10, 2005 10:18 pm ] |
| Post subject: | |
Seth, FYI there's another thread on the forum on the same subject. I think between Clint's answer and the other thread you'll find out via pics why. |
|
| Author: | SethX9 [ Sun Sep 11, 2005 8:12 am ] |
| Post subject: | |
Increased angle of departure....got it. I'd hate to have had to learn that lesson the hard way!
Thx |
|
| Author: | skrracing [ Sun Sep 11, 2005 1:02 pm ] |
| Post subject: | |
Yea a few guys did when we lead the trails at Camp Jeep CA last year. By the way the gas mount is a Conn Ferr that i got from All J Products. It does not come set up for a KJ so they make a mount for it to work in the factory holes for the tire mount. Hope that helps. Later...clint |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|