| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rubbers http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=18909 |
Page 1 of 1 |
| Author: | Neatus [ Sat Mar 24, 2007 9:52 am ] |
| Post subject: | Rubbers |
Does anyone know where I can get a full set of replacement rubber or poly bushings for all my front suspension components. Mine have a 100K miles on em now and are all dry rotted, cracked etc... I also need to replace my strut fork bushings asap as they are pretty much gonners. Probably from me taking the fork off and putting it back in so many times. Thanks folks.... Neatus out..... |
|
| Author: | Dje Ryu [ Sat Mar 24, 2007 11:32 am ] |
| Post subject: | |
most of them are pressed in requiring special tools. You'll probably have to get entire LCAs to get all of those bushings. As for the sway arm brackets and bushings... I know you can get Daystar bushings for the front two mointing points. Not sure about bushings for the rest of the arms, unless you went to JKS disco's |
|
| Author: | Neatus [ Sat Mar 24, 2007 11:46 am ] |
| Post subject: | |
Roger that, thanks a bunch. |
|
| Author: | Mutt [ Sat Mar 24, 2007 11:52 am ] |
| Post subject: | |
This is the place you should check with. http://www.energysuspension.com/ |
|
| Author: | Signcutter21 [ Sat Mar 24, 2007 12:09 pm ] |
| Post subject: | |
I was able to get UCA bushings and some others which i forgot what ones from the dealer. Took a few days to get them in, but they weren't too expensive. mike |
|
| Author: | tjkj2002 [ Sat Mar 24, 2007 12:18 pm ] |
| Post subject: | Re: Rubbers |
Neatus wrote: Does anyone know where I can get a full set of replacement rubber or poly bushings for all my front suspension components. Mine have a 100K miles on em now and are all dry rotted, cracked etc... I also need to replace my strut fork bushings asap as they are pretty much gonners. Probably from me taking the fork off and putting it back in so many times. Thanks folks.... Got my new OEM LCA's from worldpartsexpress.com for $194 apiece and they came with all 3 new bushings installed.Only take about 2-3 hours to swap out then get a alignment.Mine where toast at 48,000 miles,now it rides so much better.
Neatus out..... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|