| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| I bent my front hooks :( http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=18911 |
Page 1 of 1 |
| Author: | callaway [ Sat Mar 24, 2007 10:42 am ] |
| Post subject: | I bent my front hooks :( |
playing around at the badlands yesterday i messed up my front hooks... 
the drivers side bent down after knocking into a rock and the other pulled up after i had to be pulled out of a situation. i'm not sure if this is the actual hook that bent or where it mounts to. are these still safe to use or should i take them off and replace? |
|
| Author: | chetos [ Sat Mar 24, 2007 11:20 am ] |
| Post subject: | |
Aren't they meant to give way in certain situations?? Like in a colision? If that's the case you might need to replace now as they could become a flying hazard if used. |
|
| Author: | Blue KJ in PA [ Sat Mar 24, 2007 12:02 pm ] |
| Post subject: | |
Yep time to remove and replace...or add a front hitch...or do Gris's alternative to the front hitch |
|
| Author: | callaway [ Sat Mar 24, 2007 12:30 pm ] |
| Post subject: | |
Blue KJ in PA wrote: Yep time to remove and replace...or add a front hitch...or do Gris's alternative to the front hitch
i'm thinking i'm gonna try what Gris did. do you think i could have bent the mounting area? |
|
| Author: | 1300ZUK [ Sat Mar 24, 2007 2:01 pm ] |
| Post subject: | |
callaway wrote: Blue KJ in PA wrote: Yep time to remove and replace...or add a front hitch...or do Gris's alternative to the front hitch i'm thinking i'm gonna try what Gris did. do you think i could have bent the mounting area? thats probably what is bent, either that or the stamped piece that comes on the hook. |
|
| Author: | callaway [ Sat Mar 24, 2007 3:46 pm ] |
| Post subject: | |
i just went out to take some pictures... 1300ZUK wrote: thats probably what is bent, either that or the stamped piece that comes on the hook.
on the drivers side it might have been the stamped piece that moved... 
but on the passengers side where i bolted to bent (its hard to see from the pics but the metal is bent downwards)... 
would it be safe for me to take the hooks off, pound the metal back into place, and reattach hooks or should i take the hooks off, pound the metal back into place, and get a front hitch... |
|
| Author: | chetos [ Sat Mar 24, 2007 4:27 pm ] |
| Post subject: | |
If you're doing that kind of wheeling, I'd say go with a hitch or an ARB!!! |
|
| Author: | callaway [ Sat Mar 24, 2007 4:38 pm ] |
| Post subject: | |
chetos wrote: If you're doing that kind of wheeling, I'd say go with a hitch or an ARB!!!
i'm going to have to go the way of the hitch then... i'd love an ARB or RL front bumper but at the current time those are too much $$ =/ |
|
| Author: | Jeger [ Sat Mar 24, 2007 5:57 pm ] |
| Post subject: | |
I do believe you just motivated me to get a hitch as well. I hope we can still find some. |
|
| Author: | 1300ZUK [ Sat Mar 24, 2007 10:46 pm ] |
| Post subject: | |
this makes me want to reinforce my uniframe 
|
|
| Author: | the_titan [ Sat Mar 24, 2007 11:51 pm ] |
| Post subject: | |
Yeah, some reinforcement wouldn't hurt, but the hooks are meant to be used together for load dispersement. Pulling hard on one hook is bound to do that. Plus they're rescue hooks so I can't vouch for how much you're supposed to be able to use them without some damage as a result, at least the fronts. |
|
| Author: | tjkj2002 [ Sat Mar 24, 2007 11:57 pm ] |
| Post subject: | |
The front hooks are only rated for 5000 lbs,heck my KJ is heavier than that! |
|
| Author: | Jeepjeepster [ Sun Mar 25, 2007 12:14 am ] |
| Post subject: | |
The hooks are made for lateral force(pulling), not vertical. 
|
|
| Author: | Fulltimer [ Sun Mar 25, 2007 4:00 am ] |
| Post subject: | |
Good suggestions. After metal is bent and then bent back to the original shape it isn't as strong. Terry |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|