Hi,

does anyone have wheel spacer on his/her kj ? I would like to know good or bad comments... does it take more gaz ? It is hard on bearings ? Does it rub on fender ? If you can post your picture with your tires size, I'll be spoiled !

Thanks

Frank

_________________
---
Frankside

spidertrax spacers.. with stock tires 225/75/16 rubbing happened at the pinch weld but a VERY small amount.. just enough to shine the plastic a bit at full turn. now i have a frankenlift with 265/75/16's and they rub pretty bad on the front bumper/ front of the inner fender but clear the swaybar and rear pinchweld (which is not beat down).. sorry i dont have any pictures execpt this one..

Passangers side


Drivers side
[/quote]

I have spidertrax 1.25" spacers and have no rubbing at all. 3" Rough County lift, and 245/75 mtr's. pinch weld is not beaten down, minor fender trimming with ARB bumper, and no rubbing on the swaybar.

All of this is at full lock, forward and reverse.

_________________
2003 limited 3.7L V6
Vader Edition

http://www.cardomain.com/ride/3219059