| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wheel spacer infos needed... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=19155 |
Page 1 of 1 |
| Author: | Frankside [ Sat Mar 31, 2007 11:10 am ] |
| Post subject: | Wheel spacer infos needed... |
Hi, does anyone have wheel spacer on his/her  kj ? I would like to know good or bad comments... does it take more gaz ? It is hard on bearings ? Does it rub on fender ? If you can post your picture with your tires size, I'll be spoiled !
Thanks Frank |
|
| Author: | 2006 KJ [ Sat Mar 31, 2007 1:39 pm ] |
| Post subject: | |
spidertrax spacers.. with stock tires 225/75/16 rubbing happened at the pinch weld but a VERY small amount.. just enough to shine the plastic a bit at full turn. now i have a frankenlift with 265/75/16's and they rub pretty bad on the front bumper/ front of the inner fender but clear the swaybar and rear pinchweld (which is not beat down).. sorry i dont have any pictures execpt this one.. Passangers side 
Drivers side  [/quote]
|
|
| Author: | Hood297 [ Sun Apr 01, 2007 4:11 pm ] |
| Post subject: | |
I have spidertrax 1.25" spacers and have no rubbing at all. 3" Rough County lift, and 245/75 mtr's. pinch weld is not beaten down, minor fender trimming with ARB bumper, and no rubbing on the swaybar. All of this is at full lock, forward and reverse. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|