Finally decided to go with the OME lift and was wondering if i could get some input on which type of coils i should use. I installing my M8000 warn next weekend and the lift the following weekend(can't wait!!) . Iam installing the winch without a aftermarket bumper so the extra added weight to the front end will be about 110lbs(winch and mounting plate). This weight is probably border line between the HD's or MED's, but i would like some advice? Mostly the kj is a daily driver with occasional offroad adventures, so the on road ride must be pretty good.Should i use the HD's in the front or the mediums????? Making the order on moday

_________________
**REMEMBER YOU CAN ALWAYS GET A HUMMER IN A JEEP.... YOU CAN'T GET A JEEP IN A HUMMER**
2003 Jeep Liberty(KJ) Renegade,235/75/16 Goodyear Wrangler Silent Armors 245/75/16 MTR's,Factory Skids, Selec-Trac,trac lock,Husky Floor Liners,OME Lift,948 rear/926 front,Rusty's strut plate,clevis 2.5 "s, Al's UCA's Gen 4.5.

HD's front and MED rear would help level out the Jeep. Depending on how you position the coils on the front, you can get upwards of 3 nuts on it without upper balljoint contact.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

So i would have to position the coils so the A-arms/UBL's dont hit? To do this i would just have to turn it until i feel that there would be no contact?or is there any other way so it can be done the first time?

_________________
**REMEMBER YOU CAN ALWAYS GET A HUMMER IN A JEEP.... YOU CAN'T GET A JEEP IN A HUMMER**
2003 Jeep Liberty(KJ) Renegade,235/75/16 Goodyear Wrangler Silent Armors 245/75/16 MTR's,Factory Skids, Selec-Trac,trac lock,Husky Floor Liners,OME Lift,948 rear/926 front,Rusty's strut plate,clevis 2.5 "s, Al's UCA's Gen 4.5.

So does anyone have the HD's up front and med's in the rear with a winch up front withe the stock bumper? Any info would be great from anyone!! thanks

_________________
**REMEMBER YOU CAN ALWAYS GET A HUMMER IN A JEEP.... YOU CAN'T GET A JEEP IN A HUMMER**
2003 Jeep Liberty(KJ) Renegade,235/75/16 Goodyear Wrangler Silent Armors 245/75/16 MTR's,Factory Skids, Selec-Trac,trac lock,Husky Floor Liners,OME Lift,948 rear/926 front,Rusty's strut plate,clevis 2.5 "s, Al's UCA's Gen 4.5.

I have the HDs and a ARB so about the same weight as the winch rides great, no sag!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Perfect that what i wanted to hear!!! Thanks tommudd