LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Got my ARB Bull Bar on today!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=20092		 Page 1 of 1
Author:  humptyjumped [ Wed Apr 25, 2007 1:31 am ]
Post subject:  Got my ARB Bull Bar on today!
Check it out!!! I will post a nice pic of the KJ with it on
tomorrow (it was dark by the time I finished)

Image

Bumpers off...

Image

Getting there...

Image

Cutting the flares with a keyhole saw...

Image

Bumper mount on....

Image

Almost Done!!!
Author:  HyperKJ [ Wed Apr 25, 2007 1:45 am ]
Post subject: 
lookin good!!
Author:  humptyjumped [ Wed Apr 25, 2007 2:00 am ]
Post subject: 
HyperKJ wrote:
lookin good!!


thanks! took a little longer than I thought it would,
but really happy with it!!
Author:  Neatus [ Wed Apr 25, 2007 2:08 am ]
Post subject: 
Dude, that KJ is gonna be a Honda smashing machine! (just don't smash my Honda please)
Author:  Jeep_R_Roo14 [ Wed Apr 25, 2007 6:35 am ]
Post subject: 
Good job!! Looks great!! Glad you like it. :D
Author:  Tokyojoe [ Wed Apr 25, 2007 8:44 am ]
Post subject: 
Did you remove the green tape or are you going to leave it on for racing stripe affects? :lol:


Great job! How well did the keyhole saw work?
Author:  humptyjumped [ Wed Apr 25, 2007 11:54 am ]
Post subject: 
Tokyojoe wrote:
Did you remove the green tape or are you going to leave it on for racing stripe affects? :lol:


Great job! How well did the keyhole saw work?


I like the tape too. think I will leave it for a while :lol:

Keyhole saw worked good.... some burrs (not many and easy
to take care of), mostly a good sweat sawing away.
Author:  cuatroXcuatro [ Wed Apr 25, 2007 1:25 pm ]
Post subject: 
How was the fit?
Mine didn't line up properly, it's angled upwards just slightly, enough so you can't drill and bolt the bottom two tabs. Same thing happened to a buddy of mine with his.
One of the signal light brackets was out of alighment also, took a good hour with a file to make it work. Bracket with slot for light tab wasn't flush with inside of bumper when it was welded.
Other than that its a great looking bumper!
Author:  humptyjumped [ Wed Apr 25, 2007 4:28 pm ]
Post subject: 
cuatroXcuatro wrote:
How was the fit?
Mine didn't line up properly, it's angled upwards just slightly, enough so you can't drill and bolt the bottom two tabs. Same thing happened to a buddy of mine with his.
One of the signal light brackets was out of alighment also, took a good hour with a file to make it work. Bracket with slot for light tab wasn't flush with inside of bumper when it was welded.
Other than that its a great looking bumper!


I guess I got lucky..... Aligned perfectly. I needed a BFH to get the 10mm bolts through a couple of
the holes, but worked out great!
Author:  EOD-KJ [ Wed Apr 25, 2007 6:14 pm ]
Post subject: 
now all you need is a license plate and some lights and some shackles!!!
Author:  tommudd [ Wed Apr 25, 2007 6:31 pm ]
Post subject: 
I must of been lucky also as mine when on so easy, of course it had already been on a black KJ for two weeks so was kind of used to it! :lol: Looks good though Humptyjumped!!! Just wait till you park next to a stock KJ
Author:  2006 KJ [ Wed Apr 25, 2007 7:11 pm ]
Post subject: 
looks great! KJ's look real bug eye'd without a bumper and grill. hahah
Author:  humptyjumped [ Wed Apr 25, 2007 8:47 pm ]
Post subject: 
Pics of it done here...

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?p=197310#197310

Thanks everybody! Wouldn't have attepted it if it weren't for the
advice I got on LOST.
Author:  spencevans [ Fri Apr 27, 2007 2:47 am ]
Post subject: 
It looks great. The ArB 02-04 bumpers are really good looking. I really don't care for the 05+ bumpers. Thanks for the pics.
Author:  sidewayskj [ Fri Apr 27, 2007 1:04 pm ]
Post subject: 
looks good on the kj I want an ARB bullbar :twisted:
Author:  ROADHAWG [ Fri Apr 27, 2007 1:21 pm ]
Post subject: 
That bumper is lookin mighty sweet :D Should look even better once you get your lift in. We'll have to get the local L.O.S.T. guys out soon to play in the mud with all those new pieces you have.
Author:  humptyjumped [ Fri Apr 27, 2007 3:19 pm ]
Post subject: 
I'm in for a trip!!!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/